Pegas Gonda - pily na kov
TWO-COLUMN BAND SAW MACHINES FOR VERTICAL CUTS
Two-column band saw machines for vertical cuts. There is the construction with the pre-tight linear bearings.This rugged machine is suitable for cutting of full materials with the attention to the cutting performance. The hydraulic agregate controlls all working functions of the semiautomatic machine.CNC= the completely numerically controlled automat with the material feeder with the possibility of setting of several programms for setting of numbers and lenghts of cutted materials.
HIGH TECH BAND SAW MACHINE
The top speed is top version of production range saw machine Pegas. Saw with complete caroserie, CNC control system with HIGH-TECH technologie for using carbide band in productive cuting. The feed towards the cut by the servomotor, the movement of the feeder by the ball screw.
BAND SAW MACHINE OF A MOVABLE WORKING TABLE
A band saw machine with an unique conception of a two- column version and of a movable working table. The table serves for a fixing of material and its precise setting. There is possible to change a level of a blade, it enables to make vertical as well as horizontal cuts.
BAND SAW MACHINE FOR CUTTING OF TUBES
An unique conception of a band saw machine for cutting of tubes of big diameters.
TWO-COLUMN BAND SAW MACHINE FOR ANGLE CUTS
A two-column semiautomatic band saw machine with a complete hydraulic controll. The two-column construction with linear bearings ensure max. precision and speed of blade.Turning for angle cuts up to 60 grades to the left and to the right.
AUTOMATIC BAND SAW MACHINE
All working movements of an arm, a vice and feeders are manipulated by a hydraulic agregate. The arm is pushed by towards the cut by a doubleacting hydraulic cylinder. A speed and a force of a working movement are regulated. There is possible to make a lot of feeds. Number of pieces is set in the controlling panel, setting of a lenght is made manually. It is possible to choose an automatic or a semiautomatic regime where all movements are controlled independently. Angle cuts are possible.F = more powerfull engine with a frequency convertor for a fluent setting of circumferential bladespeed.
SEMIAUTOMATIC BAND SAW MACHINE
A hydraulic semiautomatic band saw machine SHI with a complete hydraulic controll. The machine is equipped by a controll system and by a hydraulic agregate which after the starting a cycle controlls vice clamping, cut, arm lifting to a selected location and vice opening. The arm of machine is pushed towards the cut by a double acting hydraulic cylinder with a possible regulation of a press and rate of flow. Material is manually manipulated. Turning arm for angle cuts.LR = arm turning for angle cuts to the left and to the right
F = more powerfull engine with a frequency convertor for a fluent setting of a circumferential blade speed
GRAVITATIONAL BAND SAW MACHINE
Manually controlled quick clamping vice, cut is regulated by a hydraulic damper and a restrictor choke valve. A course of a cut is not influenced by a human factor and it causes a higher bladelife. A operator starts a machine pressing button START and sets a cutting speed. After finnishing the cut machines stops itself automatically and an operator lifts the arm manually to the start posittion. Feeding of material is manual. Angle cuts are possible by arm turning.LR = the arm turns to the left and to the right to make angle cuts.
F = more powerfull engine with a frequency converter for a fluent setting of a circumferential bladespeed.
