BAND SAW MACHINES

We are here to solve your cutting...

OPTION

NO172 _ExWorks- tech. data are valid on 1.3.2017. Producer has the right to make changes of technical data.

1000 CAMEL X
Code Description Type
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
LED

Lighting of workink space.

ST
ECK

Cleaning brush of blade driven actively by motor.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
NPH

Hydraulic tension of band.

ST
RTS

Regulation press of vice.

ST
BOX-TRI-BIG

Box for the chips 200 l with emulsion draining to the waterproof tank.

O
1000-VTH

Chain chip extractor, includedd 1 pcs of BOX-TRI.

OP
1000-SRZ

Vice behind the cut. Hydraulic clamping of the material behind the cut.

OP
1000-SRH

The additional jaw of the vice for clamping bars, smaller as 600 mm.

O
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
1000-ZO

The frame for transportation with the tarp.

O
1000-HPR

Hydraulic upper clamping. Jaw clamps material in vertical direction using hydraulic cylinder and two axis of linear leading.

O
1000-RDT 1000/1150
1000-RDT 1000/1150

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 1000 mm, width of cylinders 1150 mm, 3 rollers, capacity  2000 kg/m. 

O
1000-RDT 2000/1150
1000-RDT 2000/1150

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 2000 mm, width of cylinders 1150 mm, 5 rollers, capacity  2000 kg/m. 

O
1000-RDM-2000/1150
1000-RDM-2000/1150

Input or output robust roller conveyor with driven rollers . Driving by electrical engine, vorm gearbox and inverter. By chain are driving cylinders. Width of cylinders 1150 mm, length 2000 mm, capacity 2000kg/m. Impossibile use for automatical saws CNC !!!

OP
1000-RDML 2000/1150
1000-RDML 2000/1150

Input or output robust roller conveyor with driven rollers. Driving from RDM throught  chain. Width of cylinders 1150 mm, length 2000 mm, capacity 2000kg/m. Impossibile use for automatical saws CNC!!!

OP
1000-VZM
1000-VZM

The roller table length 900 mm, width 1150 mm with 1 pc of pasive cylinder and one peace of driven cylinder. The roller which is driven by electroengine is able to lift the material hydraulically above the level of other rollers.   It serves as the connecting part of the roller conveyors or for connecting of the roller conveyor and the machine. Control of the roller is independent on the controlling of the machine, the roller has its own controlling panel.

OP
1000-RBR
1000-RBR

Side support fixed cylinder, with  its own frame, it is mounted to roller tables.

O
1000-RBRS
1000-RBRS

Side adjustable roller with its own  steel frame, and with the movable leading.

O
1000-RBRS-H
1000-RBRS-H

Hydraulically movable side roller with it’s own frame.

OP
OZP 2000
OZP 2000

Mechanical fixed stop with ruler and scale line 2 meters long.

O
OZP-D 2000
OZP-D 2000

Mechanical fixed stop with digital display 2 meters long.

O
OZS 2000
OZS 2000

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Digital display of setting length.

O
OZS-D 2000
OZS-D 2000

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops.

O
OZP-L 2000
OZP-L 2000

2 meters long extension of OZP.

O
OZD-L 2000
OZD-L 2000

2 meters long extension of OZD.

O
1000-QPARTS

Set of easy worn away spare parts :
* 8 pcs: hard-metal plate side 765000, HF10
* 2 pcs: hard-metal plate upper LNKW 19-1198000, HF10
* 10 pcs: screw for vidia plates US14
* 12 pcs: bearing 61904 2RS
* 10 pcs: cleaning brush

O
1000-NAV

Manual instruction – printed version.

O
1000 CAMEL X-CNC-4M
Code Description Type
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
LED

Lighting of workink space.

ST
ECK

Cleaning brush of blade driven actively by motor.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
NPH

Hydraulic tension of band.

ST
RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

ST
OCP

Rebounding jaw of feeder vice. Controled by short-stroke cylinder, placed on linear leading.

ST
BOX-TRI-BIG

Box for the chips 200 l with emulsion draining to the waterproof tank.

O
1000-VTH

Chain chip extractor, includedd 1 pcs of BOX-TRI.

OP
1000-SRZ

Vice behind the cut. Hydraulic clamping of the material behind the cut.

OP
1000-SRH

The additional jaw of the vice for clamping bars, smaller as 600 mm.

O
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
1000-ZO

The frame for transportation with the tarp.

O
1000-HPR-A

Hydraulic upper clamping. Jaw clamps material in vertical direction using hydraulic cylinder and two axis of linear leading. Set of 2 pcs.  

O
1000-RDT 1000/1150
1000-RDT 1000/1150

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 1000 mm, width of cylinders 1150 mm, 3 rollers, capacity  2000 kg/m. 

O
1000-RDT 2000/1150
1000-RDT 2000/1150

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 2000 mm, width of cylinders 1150 mm, 5 rollers, capacity  2000 kg/m. 

O
1000-VZM
1000-VZM

The roller table length 900 mm, width 1150 mm with 1 pc of pasive cylinder and one peace of driven cylinder. The roller which is driven by electroengine is able to lift the material hydraulically above the level of other rollers.   It serves as the connecting part of the roller conveyors or for connecting of the roller conveyor and the machine. Control of the roller is independent on the controlling of the machine, the roller has its own controlling panel.

OP
1000-RDH
1000-RDH

Independent  movable cylinder, adjustable height, capacity 1000kg.

O
1000-RBR
1000-RBR

Side support fixed cylinder, with  its own frame, it is mounted to roller tables.

O
1000-RBRS
1000-RBRS

Side adjustable roller with its own  steel frame, and with the movable leading.

O
1000-RBRS-H
1000-RBRS-H

Hydraulically movable side roller with it’s own frame.

OP
1000-RBRS IMPUT
1000-RBRS IMPUT

Side rollers mounted on a first input section of transporter.

O
1000-QPARTS

Set of easy worn away spare parts :
* 8 pcs: hard-metal plate side 765000, HF10
* 2 pcs: hard-metal plate upper LNKW 19-1198000, HF10
* 10 pcs: screw for vidia plates US14
* 12 pcs: bearing 61904 2RS
* 10 pcs: cleaning brush

O
1000-NAV

Manual instruction – printed version.

O
1200x1400 HERKULES X
Code Description Type
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
PCP

One year subscription for external machine programming (for Siemens control system) using www server.

OP
BLUEBOX

Router for remote saw service.

OP
LED

Lighting of workink space.

ST
NPH

Hydraulic tension of band.

ST
ECK

Cleaning brush of blade driven actively by motor.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
1200-VTH

Chain chip extractor, includedd 1 pcs of BOX-TRI.

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
MINI LUBE 80

Wasteless lubricating system – 2 pumps, for blade 80 mm. Instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
1200-SRZ

Vice behind the cut. Hydraulic clamping of the material behind the cut.

OP
1200-HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

OP
1200-HP-Z

Hydraulical upper vice mounted on the vice behind the cut. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder connected with the cylinder of the vice.

OP
1200-KKR

Check of cut perpendicularity.

OP
BOX-TRI-BIG

Box for the chips 200 l with emulsion draining to the waterproof tank.

O
1200-LSG

Laser safety wall.

OP
1200-TDT 2000/1400

Input or output  extra robust roller table, width 1000 mm, length 2000 mm, 8 rollers.  Bearing capacity 7000 kg/m.  One vertical roller RBR is a piece of equipment of the roller conveyor.

O
1200-TDM 2000/1400

Input or output extra robust roller table with the drive. Driving by electrical engine, vorm gearbox and inverter. With 1000 mm, length 2000 mm, 8 rollers. Bearing capacity 7000 kg/m. One vertical roller RBR is a piece of equipment of the roller conveyor.

O
1200-TDM-L 2000/1400

Extra robust  lengthening 2 m segment with driven rollers, assembled to TDM  or directly to the drived rollers in machine, (they use the power of  hydroengines), 8 rollers. Bearing capacity 7000 kg/m. One vertical roller RBR is a piece of equipment of the roller conveyor.

O
1200-RBR

Side support fixed cylinder, height 750 mm, diameter 170 mm with its own frame, mounted to roller tables. Attention: only 1 psc for 1 roller table!

O
1200-RBRS

Side adjustable roller,  with its own steel frame, and with the movable leading 1400 mm, fixed by 2 pcs of T-nuts. Height 750 mm, diameter 170 mm. Attention: only 1 psc for 1 roller table!

O
1200-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!! 

O
1200-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L.

O
1200-OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
1200-OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Works only with OZSD-L.

O
1200-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
1200-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
1200-OZS-L 2000

Measuring system for OZS mounted on 2 m roller table.

O
1200-OZSD-L 2000

Measuring system for OZS-D mounted on LAST 2 m roller table in the setup.

O
1200-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  11650x80x1,6

O
1200-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  11650x80x1,6

O
1200-NAV

Manual instruction – printed version.

O
1200x1600 GOLEM
Code Description Type
MAHLER

Controling system MAHLER.

ST
LED

Lighting of workink space.

ST
NPH

Hydraulic tension of band.

ST
ECK

Cleaning brush of blade driven actively by motor.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
1200-VTH-GOLEM

Chain chip extractor, includedd 1 pcs of BOX-TRI.

ST
1200-GUP1

Clamp for clamping of material at work table.

ST
PANTOGRAF OP
BAND-ROT

The aplication for the change of the cutting plane. There is a seating of the guide and the hydraulic turning of the plane + controlling system for vertical as well as horizontal cuts. 

OP
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
BOX-TRI-BIG

Box for the chips 200 l with emulsion draining to the waterproof tank.

O
1200-NAV

Manual instruction – printed version.

O
1200-PANTOGRAF

Position of control panel on the flexibile pantograph.

OP
1250x1600 PORTAL
Code Description Type
MAHLER

Controling system MAHLER.

ST
LED

Lighting of workink space.

ST
NPH

Hydraulic tension of band.

ST
ECK

Cleaning brush of blade driven actively by motor.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
1250-VTH-PORTAL

Chain chip extractor, includedd 1 pcs of BOX-TRI.

ST
PANTOGRAF OP
BAND-ROT

The aplication for the change of the cutting plane. There is a seating of the guide and the hydraulic turning of the plane + controlling system for vertical as well as horizontal cuts. 

OP
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
BOX-TRI-BIG

Box for the chips 200 l with emulsion draining to the waterproof tank.

O
1250-K 3000

Segment for the Portal travel in the length of 3 m. Linear leading, feed comb, the sensor of the position and the covering. 

O
1250-S 3000

Firm table with grooves for clamping of the material. Segment 3 m.

O
1250-PRIZMA

The robust mechanical clamping desk with two wedges for supporting of the material of the round diameter.

O
1250-CAR

Pulled trolley, bearing capacity 20 t, height adjustment - mechanical.

O
1250-CAR-M

Driven pulley. Bearing capacity 20 t, height adjustment - mechanical. Electroengine and gear box for the trolley travel and the transport of the material. It works with 1250 – CAR.

O
1250-K CAR 3000

The rail for trolleys, modul of the length of 3 m, it is neccessary to install into the basement.

O
1200-NAV

Manual instruction – printed version.

O
220x250 GH-R
Code Description Type
220 M2V

Engine with the gear box - 2 speed

ST
V280

Movable cylinder, adjustable height, width 280 mm, capacity 100 kg.

O
220-EKV O
220-RDZ
220-RDZ

Output connecting part of the roller conveyor RD - ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price. 

O
RD 1000/290 O
RD 2000/290 O
RD VR-290
RD VR-290

Robust cylinder length 290 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RBS 200/290
RBS 200/290

Side vertical movable cylinder, height 200 mm, working only with RB.

O
RHS 290
RHS 290

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 290 mm

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R290

Movable cylinder, adjustable height, width 290 mm, capacity 200 kg.

O
220-QPARTS

Set of easy worn away spare parts :
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z

O
220-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  2450x27x0,9.

O
220-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  2450x27x0,9.

O
220 - NAV

Manual instruction – printed version.

O
PAL EUR

Packing on the palette 0,8 m x1,2 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-220

Packing in the wooden cage.

O
230x280 A-CNC-R
Code Description Type
MITSUBISHI NC
MITSUBISHI NC

Controling system MITSUBISHI with touchscreen.

ST
MITSUBISHI HMI 7"

Controlling panel with larger display – 7“ (standard = 4").

OP
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
230-DPP

Automatic end stop of the upper position.

ST
240-CK

Cleaning brush of blade, driven passively (driven by sawing blade).

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
PUD

Digital indicator of adjusted angle

ST
230-HP-A OP
RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

OP
230-VTS OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LIGHT L1

Lighting of working space.

OP
230 RDZ
230 RDZ

Output connecting part of the roller conveyor RD - ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price. 

O
RD 1000/290 O
RD 2000/290 O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RD VR-290
RD VR-290

Robust cylinder length 290 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RBS 200/290
RBS 200/290

Side vertical movable cylinder, height 200 mm, working only with RB.

O
RHS 290
RHS 290

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 290 mm

O
RDN
RDN

Support for RD.

O
R290

Movable cylinder, adjustable height, width 290 mm, capacity 200 kg.

O
230-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
230-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  2720x27x0,9

O
230-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.   2720x27x0,9

O
230 - NAV

Manual instruction – printed version.

O
PAL2

Packing on the palette 2,4 m x 2,4 m.

O
OBAL2

Package - wooden box 2,4 m x 2,4 m.

O
230-RTS-A

Regulation press of vice – set of 2pcs for bothvices.

OP
230x280 GH-LR
Code Description Type
230-M2V

Engine with the gear box- 2 speed

ST
230-OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
240-CK

Cleaning brush of blade, driven passively (driven by sawing blade).

ST
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
230 RDZ
230 RDZ

Output connecting part of the roller conveyor RD - ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price. 

O
230 RDP
230 RDP

Input connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price 

O
RD 1000/290 O
RD 2000/290 O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RD VR-290
RD VR-290

Robust cylinder length 290 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RBS 200/290
RBS 200/290

Side vertical movable cylinder, height 200 mm, working only with RB.

O
RHS 290
RHS 290

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 290 mm

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R290

Movable cylinder, adjustable height, width 290 mm, capacity 200 kg.

O
230-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
230-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  2720x27x0,9

O
230-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.   2720x27x0,9

O
230 - NAV

Manual instruction – printed version.

O
PAL EUR

Packing on the palette 0,8 m x1,2 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
KARTON-230

Packing in the kartone + wooden palet.

O
230x280 SH-LR
Code Description Type
A2
A2

Semiautomatical control systém A2

ST
M2V

Engine with the gear box- 2 speed

ST
OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
240-CK

Cleaning brush of blade, driven passively (driven by sawing blade).

ST
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
230 RDZ
230 RDZ

Output connecting part of the roller conveyor RD - ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price. 

O
230 RDP
230 RDP

Input connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price 

O
RD 1000/290 O
RD 2000/290 O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RD VR-290
RD VR-290

Robust cylinder length 290 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RBS 200/290
RBS 200/290

Side vertical movable cylinder, height 200 mm, working only with RB.

O
RHS 290
RHS 290

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 290 mm

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R290

Movable cylinder, adjustable height, width 290 mm, capacity 200 kg.

O
230-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
230 - NAV

Manual instruction – printed version.

O
PAL EUR

Packing on the palette 0,8 m x1,2 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-230

Packing in the wooden cage.

O
230x280 SHI-LR
Code Description Type
MITSUBISHI
MITSUBISHI

Controling system MITSUBISHI.

ST
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
230-DPP

Automatic end stop of the upper position.

ST
OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
240-CK

Cleaning brush of blade, driven passively (driven by sawing blade).

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
230-HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
230 RDZ
230 RDZ

Output connecting part of the roller conveyor RD - ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price. 

O
230 RDP
230 RDP

Input connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price 

O
RD 1000/290 O
RD 2000/290 O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RD VR-290
RD VR-290

Robust cylinder length 290 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RBS 200/290
RBS 200/290

Side vertical movable cylinder, height 200 mm, working only with RB.

O
RHS 290
RHS 290

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 290 mm

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R290

Movable cylinder, adjustable height, width 290 mm, capacity 200 kg.

O
230-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
230 - NAV

Manual instruction – printed version.

O
230-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  2720x27x0,9

O
230-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.   2720x27x0,9

O
PAL EUR

Packing on the palette 0,8 m x1,2 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-230

Packing in the wooden cage.

O
250x315 GH-LR
Code Description Type
250 M2V

Engine with the gear box- 2 speed

ST
OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
250 MST

Engine with the gear box for cutting stainless steel and tool steel (23/46 m/min, 0,7/1,2 kW).

OP
250-CK

Cleaning brush of blade, driven passively by sawing blade.

ST
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
RD 1000/290 O
RD 2000/290 O
RD VR-290
RD VR-290

Robust cylinder length 290 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RBS 200/290
RBS 200/290

Side vertical movable cylinder, height 200 mm, working only with RB.

O
RHS 290
RHS 290

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 290 mm

O
240/250 RDP
240/250 RDP

Input connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price 

O
240/250 RDZ
240/250 RDZ

Roller table. Lenght 2000 mm, width of cylinders 290 mm, capacity 200 kg/m, adjustable leg includedd in price.

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R290

Movable cylinder, adjustable height, width 290 mm, capacity 200 kg.

O
250-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
250-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  2825x27x0,9

O
250-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth. 2825x27x0,9  

O
250 - NAV

Manual instruction – printed version

O
PAL EUR

Packing on the palette 0,8 m x1,2 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-250

Packing in the wooden cage.

O
250 RDZ = 240 RDZ

Output connecting part of the roller conveyor RD - ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg and console for connecting with machine included in price. 

O
250 RDP =240 RDP

Input connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg and console for connecting with machine included in price. 

O
250x315 SH-LR
Code Description Type
A2
A2

Semiautomatical control systém A2

ST
M2V

Engine with the gear box- 2 speed

ST
OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
250-CK

Cleaning brush of blade, driven passively by sawing blade.

ST
250-HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

O
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
RD 1000/290 O
RD 2000/290 O
RD VR-290
RD VR-290

Robust cylinder length 290 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RBS 200/290
RBS 200/290

Side vertical movable cylinder, height 200 mm, working only with RB.

O
RHS 290
RHS 290

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 290 mm

O
240/250 RDZ
240/250 RDZ

Roller table. Lenght 2000 mm, width of cylinders 290 mm, capacity 200 kg/m, adjustable leg includedd in price.

O
240/250 RDP
240/250 RDP

Input connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price 

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R290

Movable cylinder, adjustable height, width 290 mm, capacity 200 kg.

O
250-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
250-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  2825x27x0,9

O
250-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth. 2825x27x0,9  

O
250 - NAV

Manual instruction – printed version

O
PAL EUR

Packing on the palette 0,8 m x1,2 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-250

Packing in the wooden cage.

O
250 RDZ = 240 RDZ

Output connecting part of the roller conveyor RD - ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg and console for connecting with machine included in price. 

O
250 RDP =240 RDP

Input connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg and console for connecting with machine included in price. 

O
300x300 HERKULES X-CNC
Code Description Type
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
PCP

One year subscription for external machine programming (for Siemens control system) using www server.

OP
BLUEBOX

Router for remote saw service.

OP
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
NPH

Hydraulic tension of band.

ST
LED

Lighting of workink space.

ST
ECK

Cleaning brush of blade driven actively by motor.

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
300x300-DPP

Automatic end stop of the upper position.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

ST
300x300-VTT

Worm chip extractor for long chips (stainless-chips), includedd 1 pc of BOX-TRI.

ST
300x300-GPZ

Slide for cutted peaces-480 mm

ST
CMU-1

Opening of cutting zone from feeder side. Without contact moving of blade to upper position.

ST
ATB

Automatic feed of the material precisely  into the cutting zone.

OP
300-KKR OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
300x300-RDT 1000/350
300x300-RDT 1000/350

Robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 350 mm, length 1000 mm, 3 rollers, capacity 1000 kg/m.  Attention: this roller table cannot be mounted directly on the input to the saw. 

O
300x300-RDT 2000/350
300x300-RDT 2000/350

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor.  Width of cylinders 350 mm, length 2000 mm, 5 rollers, capacity 1000 kg/m.

O
300x300-RDZ 1000/350
300x300-RDZ 1000/350

Output  roller conveyor . Lenght 1000 mm, with 350 mm, 5 rollers, matal plates between rollers, capacity 1000 kg/m.

O
VZM-350

The cylinder of rollertable, which is driven by electroengine, with 350mm, is able to lift the material hydraulically above the level of other rollers. Working only with RDT insta 2 Pc of original cylinders. Control of the roller is independent on the controlling of the machine, the roller has its own controlling panel.

OP
300x300-V
300x300-V

Roller of roller table RDT put into gap.

O
300x300-V-NI
300x300-V-NI

Nitrided roller– timber profile, length 350. Charge for nitridezation of one roller 

O
300x300-RBS
300x300-RBS

Side support fixed cylinder, height 280 mm, diameter 67 mm with its own frame, mounted to roller tables RDT.

O
300x300-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 350 mm, mounted to the convoyer RDT. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES.

O
300x300-QPARTS

Set of easy worn away spare parts:
* 6 pcs: hard-metal plate side LNKW 19-1198000, HF10
* 6 pcs: screw for vidia plates US14
* 8 pcs: bearing 6202 2RS
* 10 pcs: cleaning brush diameter 150 mm

O
300-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  4520x34x1,1

O
300-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.   4520x34x1,1

O
300x300-NAV

Manual instruction – printed version.

O
PAL2

Packing on the palette 2,4 m x 2,4 m.

O
OBAL2

Package - wooden box 2,4 m x 2,4 m.

O
300-ATB

Automatic feed of the material precisely  into the cutting zone

OP
300x320 A-CNC-R II Generation
Code Description Type
MITSUBISHI NC
MITSUBISHI NC

Controling system MITSUBISHI with touchscreen.

ST
MITSUBISHI HMI 7"

Controlling panel with larger display – 7“ (standard = 4").

OP
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
300-PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
300-DPP

Automatic end stop of the upper position.

ST
300-SKZ

Slide of cut pieces.    

ST
300-PUD

Digital indicator of adjusted angle.

ST
300x320 HP-A

Hydraulical upper vice for mounted on the main vice and on the feeding vice.  Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder. Set of 2 pcs. 

OP
300-RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

OP
300-VTT

Worm chip extractor for long chips (stainless-chips), includedd 1 pc of BOX-TRI.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
LIGHT L1

Lighting of working space.

OP
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
300-LR-RDZ
300-LR-RDZ

Output connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 390 mm, bearing capacity 200 kg/m, adjustable leg includedd in price.

O
RD 1000/390 O
RD 2000/390 O
RD VR-390
RD VR-390

Robust cylinder length 390 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RBS 200/390
RBS 200/390

Side vertical moovable cylinder, height 200 mm,  working only with RB.

O
RHS 390
RHS 390

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 390 mm.

O
RDN
RDN

Support for RD.

O
R390

Movable cylinder, adjustable height, width 390 mm, capacity 200 kg.

O
300x320-RDZ 1000/350

Output  roller conveyor, there is a special shape for angle turning of the machine. Width of  cylinders 350 mm, length 1000 mm, capacity 1000 kg/m.

O
300x320-RDP-A 2000/350

Special input roller conveyor. Width of cylinders 350mm, length 2000 mm, 5 rollers, capacity 1000 kg/m. 

O
300x320-RDT 1000/350

Robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 350 mm, length 1000 mm, 3 rollers, capacity 1000 kg/m.  Attention: this roller table cannot be mounted directly on the input to the saw. 

O
300x320-RDT 2000/350

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor.  Width of cylinders 350 mm, length 2000 mm, 5 rollers, capacity 1000 kg/m.

O
300x320-V

Roller of roller table RDT put into gap.

O
300x320-V-NI

Surfacing of the cylinder to the hardness 55 HRC. Price for one piece.  

O
300x320-RBS

Side movable cylinder, height 200 mm, diameter 67 mm it is avalible only with RB. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES.

O
300x320-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 350 mm. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES.

O
300x320-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
300x320-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  3660x27x0,9

O
300x320-SET M51/10

Set of 10 blades in M42 quality – with customer’s choice of teeth.  3660x27x0,9

O
300 - NAV

Manual instruction – printed version.

O
PAL2

Packing on the palette 2,4 m x 2,4 m.

O
OBAL2

Package - wooden box 2,4 m x 2,4 m.

O
300x320 GH-LR
Code Description Type
300 M2V

Engine with the gear box- 2 speed

ST
OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
300-PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
300-SRZ-R

Vice behind the cut

OP
290-RP

Manual upper vice. 

O
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
LIGHT L1

Lighting of working space.

OP
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
300-LR-RDP
300-LR-RDP

Input connecting part of the roller conveyor RD -  ensures angle cuts of the machine, length 1000 mm, width 390 mm, bearing capacity 200 kg/m, adjustable leg includedd in price. 

O
300-LR-RDZ
300-LR-RDZ

Output connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 390 mm, bearing capacity 200 kg/m, adjustable leg includedd in price.

O
RD 1000/390 O
RD 2000/390 O
RD VR-390
RD VR-390

Robust cylinder length 390 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RBS 200/390
RBS 200/390

Side vertical moovable cylinder, height 200 mm,  working only with RB.

O
RHS 390
RHS 390

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 390 mm.

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R390

Movable cylinder, adjustable height, width 390 mm, capacity 200 kg.

O
300x320-RDP 1000/350

Input robust connecting conveyor, there is a special shape for angle turning of the machine. Width of  cylinders 350 mm, length 1000 mm.,  capacity 1000 kg/m. 

O
300x320-RDZ 1000/350

Output  roller conveyor, there is a special shape for angle turning of the machine. Width of  cylinders 350 mm, length 1000 mm, capacity 1000 kg/m.

O
300x320-RDP-A 2000/350

Special input roller conveyor. Width of cylinders 350mm, length 2000 mm, 5 rollers, capacity 1000 kg/m. 

O
300x320-RDT 1000/350

Robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 350 mm, length 1000 mm, 3 rollers, capacity 1000 kg/m.  Attention: this roller table cannot be mounted directly on the input to the saw. 

O
300x320-RDT 2000/350

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor.  Width of cylinders 350 mm, length 2000 mm, 5 rollers, capacity 1000 kg/m.

O
300x320-V

Roller of roller table RDT put into gap.

O
300x320-V-NI

Surfacing of the cylinder to the hardness 55 HRC. Price for one piece.  

O
300x320-RBS

Side movable cylinder, height 200 mm, diameter 67 mm it is avalible only with RB. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES.

O
300x320-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 350 mm. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES.

O
300x320-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!!  IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT

O
300x320-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
300x320-OZP-L-RDZ

Measuring system for OZP mounted on FIRST roller table.

O
300x320-OZP-LE-RDZ

Measuring system for OZP mounted on FIRST AND EITHER LAST roller table.

O
300x320-OZD-L-RDZ

Measuring system for OZD mounted on FIRST roller table.

O
300x320-OZD-LE-RDZ

Measuring system for OZD mounted on FIRST AND EITHER LAST roller table.

O
300x320-OZP-L 1000

Measuring system for OZP mounted on 1 m roller table.

O
300x320-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
300x320-OZP-LE 1000

Measuring system for OZP mounted on LAST 1 m roller table in the setup. 

O
300x320-OZP-LE 2000

Measuring system for OZP mounted on LAST 2m roller table in the setup.

O
300x320-OZD-L 1000

Measuring system for OZD mounted on 1 m roller table.

O
300x320-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
300x320-OZD-LE 1000

Measuring system for OZD mounted on LAST 1 m roller table  in the setup.

O
300x320-OZD-LE 2000

Measuring system for OZD mounted on LAST 2 m roller table in the setup.

O
300x320-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
300x320-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  3660x27x0,9

O
300x320-SET M51/10

Set of 10 blades in M42 quality – with customer’s choice of teeth.  3660x27x0,9

O
300 - NAV

Manual instruction – printed version.

O
PAL1

Packing on the palette 1,2 m x 2,0 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-300

Packing in the wooden cage.

O
300x320 SH-LR
Code Description Type
A2
A2

Semiautomatical control systém A2

ST
M2V

Engine with the gear box- 2 speed

ST
OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
300-PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
300-DPP

Automatic end stop of the upper position.

ST
300-SRZ

Vice behind the cut. Hydraulic clamping of the material behind the cut.

OP
300x320 HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

OP
300-RTS

Regulation press of vice.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
LIGHT L1

Lighting of working space.

OP
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
300-LR-RDP
300-LR-RDP

Input connecting part of the roller conveyor RD -  ensures angle cuts of the machine, length 1000 mm, width 390 mm, bearing capacity 200 kg/m, adjustable leg includedd in price. 

O
300-LR-RDZ
300-LR-RDZ

Output connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 390 mm, bearing capacity 200 kg/m, adjustable leg includedd in price.

O
RD 1000/390 O
RD 2000/390 O
RD VR-390
RD VR-390

Robust cylinder length 390 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RBS 200/390
RBS 200/390

Side vertical moovable cylinder, height 200 mm,  working only with RB.

O
RHS 390
RHS 390

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 390 mm.

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R390

Movable cylinder, adjustable height, width 390 mm, capacity 200 kg.

O
300x320-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
300 - NAV

Manual instruction – printed version.

O
PAL1

Packing on the palette 1,2 m x 2,0 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-300

Packing in the wooden cage.

O
300x320 SHI-LR
Code Description Type
MITSUBISHI
MITSUBISHI

Controling system MITSUBISHI.

ST
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
300-PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
300-DPP

Automatic end stop of the upper position.

ST
300-PUD

Digital indicator of adjusted angle.

OP
300-SRZ

Vice behind the cut. Hydraulic clamping of the material behind the cut.

OP
300x320 HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

OP
300-RTS

Regulation press of vice.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
LIGHT L1

Lighting of working space.

OP
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
300-LR-RDP
300-LR-RDP

Input connecting part of the roller conveyor RD -  ensures angle cuts of the machine, length 1000 mm, width 390 mm, bearing capacity 200 kg/m, adjustable leg includedd in price. 

O
300-LR-RDZ
300-LR-RDZ

Output connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 390 mm, bearing capacity 200 kg/m, adjustable leg includedd in price.

O
RD 1000/390 O
RD 2000/390 O
RD VR-390
RD VR-390

Robust cylinder length 390 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RBS 200/390
RBS 200/390

Side vertical moovable cylinder, height 200 mm,  working only with RB.

O
RHS 390
RHS 390

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 390 mm.

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
RDN
RDN

Support for RD.

O
R390

Movable cylinder, adjustable height, width 390 mm, capacity 200 kg.

O
300x320-RDP 1000/350

Input robust connecting conveyor, there is a special shape for angle turning of the machine. Width of  cylinders 350 mm, length 1000 mm.,  capacity 1000 kg/m. 

O
300x320-RDZ 1000/350

Output  roller conveyor, there is a special shape for angle turning of the machine. Width of  cylinders 350 mm, length 1000 mm, capacity 1000 kg/m.

O
300x320-RDT 1000/350

Robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 350 mm, length 1000 mm, 3 rollers, capacity 1000 kg/m.  Attention: this roller table cannot be mounted directly on the input to the saw. 

O
300x320-RDT 2000/350

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor.  Width of cylinders 350 mm, length 2000 mm, 5 rollers, capacity 1000 kg/m.

O
300x320-V

Roller of roller table RDT put into gap.

O
300x320-V-NI

Surfacing of the cylinder to the hardness 55 HRC. Price for one piece.  

O
300x320-RBS

Side movable cylinder, height 200 mm, diameter 67 mm it is avalible only with RB. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES.

O
300x320-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 350 mm. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES.

O
300x320-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!!  IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT

O
300x320-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
300x320-OZP-L-RDZ

Measuring system for OZP mounted on FIRST roller table.

O
300x320-OZP-LE-RDZ

Measuring system for OZP mounted on FIRST AND EITHER LAST roller table.

O
300x320-OZD-L-RDZ

Measuring system for OZD mounted on FIRST roller table.

O
300x320-OZD-LE-RDZ

Measuring system for OZD mounted on FIRST AND EITHER LAST roller table.

O
300x320-OZP-L 1000

Measuring system for OZP mounted on 1 m roller table.

O
300x320-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
300x320-OZP-LE 1000

Measuring system for OZP mounted on LAST 1 m roller table in the setup. 

O
300x320-OZP-LE 2000

Measuring system for OZP mounted on LAST 2m roller table in the setup.

O
300x320-OZD-L 1000

Measuring system for OZD mounted on 1 m roller table.

O
300x320-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
300x320-OZD-LE 1000

Measuring system for OZD mounted on LAST 1 m roller table  in the setup.

O
300x320-OZD-LE 2000

Measuring system for OZD mounted on LAST 2 m roller table in the setup.

O
300x320-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
300x320-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  3660x27x0,9

O
300x320-SET M51/10

Set of 10 blades in M42 quality – with customer’s choice of teeth.  3660x27x0,9

O
300 - NAV

Manual instruction – printed version.

O
PAL1

Packing on the palette 1,2 m x 2,0 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-300

Packing in the wooden cage.

O
340 KATANA A-CNC-R
Code Description Type
MITSUBISHI NC
MITSUBISHI NC

Controling system MITSUBISHI with touchscreen.

ST
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
LED

Lighting of workink space.

ST
340-NPH

Hydraulic tension of band.

OP
340-VTT

Worm chip extractor for long chips (stainless-chips), includedd 1 pc of BOX-TRI.

OP
PEGAS-BRP

Electronical regulation of the down-shift.

ST
PUD

Digital indicator of adjusted angle

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
340-ECK

Cleaning brush of blade driven actively by motor.

OP
340-PVZ

Supportin cylinder, situated on the base of the saw on the linear feeding - outpud side.

ST
RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

ST
340-IRP

Down shift speed indication value on the display of controling system (mm/min ).

ST
340-BSF

Feeder moving using linear leading, ball screw and servo motor.

ST
340-RNT

Frontal safety cover.

ST
340-RNT-Z

Rear safety cover.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
340-HP-A

Hydraulic upper clamping tighten the material in vertical sense by the short step hydraulic cylinder connected with the cylinder of the main vice. Set of 2 pcs. 

OP
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
VD-2000/520/60/6 O
VD-2000/520/60/10 O
VD-V-520
VD-V-520

Aditional cylinder, lenght 520 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
360-RDT 1000/520
360-RDT 1000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 1000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDT 2000/520
360-RDT 2000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 2000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RB
360-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 520 mm, monted to the convoyer RDT. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RBS
360-RBS

Side movable cylinder for preparation of bundles, adjustable, height 200 mm, diameter 67 mm it is avalible only with RB. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDH
360-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360 V
360 V

Roller of roller table RDT put into gap.

O
OZP
OZP

Mechanical fixed stop with ruler and scale line 2 meters long. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
OZP-D
OZP-D

Mechanical fixed stop with digital display 2 meters long. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
340-QPARTS

Set of easy worn away spare parts:
* 6 pcs: hard-metal plate side LNKW 19-1198000, HF10
* 6 pcs: screw for vidia plates US14
* 8 pcs: bearing 6202 2RS
* 20 pcs: cleaning brush

O
340-NAV

Manual instruction – printed version.

O
340 KATANA X-CNC-LR
Code Description Type
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
PCP

One year subscription for external machine programming (for Siemens control system) using www server.

OP
BLUEBOX

Router for remote saw service.

OP
LED

Lighting of workink space.

ST
NPH

Hydraulic tension of band.

ST
340-VTT

Worm chip extractor for long chips (stainless-chips), includedd 1 pc of BOX-TRI.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
PUD

Digital indicator of adjusted angle

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
340-ECK

Cleaning brush of blade driven actively by motor.

OP
340-PVZ

Supportin cylinder, situated on the base of the saw on the linear feeding - outpud side.

ST
RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

ST
340-IRP

Down shift speed indication value on the display of controling system (mm/min ).

ST
340-BSF

Feeder moving using linear leading, ball screw and servo motor.

ST
340-BSB

Movement  of bow by linear guides, ball screw and servo motor.

ST
340-RNT

Frontal safety cover.

ST
340-RNT-Z

Rear safety cover.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
340-HP-X

Hydraulic upper clamping tighten the material in vertical sense by the short step hydraulic cylinder connected with the cylinder of the main vice. Set of 2 pcs. Only for X-CNC.

OP
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
VD-2000/520/60/6 O
VD-2000/520/60/10 O
VD-V-520
VD-V-520

Aditional cylinder, lenght 520 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
360-RDT 2000/520
360-RDT 2000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 2000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDT 1000/520
360-RDT 1000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 1000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RB
360-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 520 mm, monted to the convoyer RDT. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RBS
360-RBS

Side movable cylinder for preparation of bundles, adjustable, height 200 mm, diameter 67 mm it is avalible only with RB. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDH
360-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360 V
360 V

Roller of roller table RDT put into gap.

O
340-QPARTS

Set of easy worn away spare parts:
* 6 pcs: hard-metal plate side LNKW 19-1198000, HF10
* 6 pcs: screw for vidia plates US14
* 8 pcs: bearing 6202 2RS
* 20 pcs: cleaning brush

O
340-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  4780x34x1,1.

O
340-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.   4780x34x1,1.

O
340-NAV

Manual instruction – printed version.

O
360x500 A-CNC-R
Code Description Type
MITSUBISHI NC
MITSUBISHI NC

Controling system MITSUBISHI with touchscreen.

ST
MITSUBISHI HMI 7"

Controlling panel with larger display – 7“ (standard = 4").

OP
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
360-IPB

Electronical indication position of the bow

ST
PUD

Digital indicator of adjusted angle

ST
360-RNT

Frontal safety cover.

ST
360-RNT-Z

Rear safety cover.

O
360-HP-A

Hydraulical upper vice for mounted on the main vice and on the feeding vice.  Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder. Set of 2 pcs. 

OP
360-RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

OP
300-VTT

Worm chip extractor for long chips (stainless-chips), includedd 1 pc of BOX-TRI.

OP
LIGHT L1

Lighting of working space.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

O
VD-2000/520/60/6 O
VD-2000/520/60/10 O
VD-V-520
VD-V-520

Aditional cylinder, lenght 520 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
360-RDT 1000/520
360-RDT 1000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 1000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDT 2000/520
360-RDT 2000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 2000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDP-2000/520
360-RDP-2000/520

Input robust connecting conveyor, there is a special shape for angle turning of the machine (it is neccessary for cutting angle - 60°) with a gutter which prevents leakage of emulsion on the floor. Width of  cylinders 520 mm, length 2000 mm. 

O
360-RDZ-2000/520
360-RDZ-2000/520

Output robust connecting conveyor, there is a special shape for angle turning of the machine. With a gutter which prevents leakage of emulsion on the floor. Width of  cylinders 520 mm, length 2000 mm.  

O
360-RB
360-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 520 mm, monted to the convoyer RDT. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RBS
360-RBS

Side movable cylinder for preparation of bundles, adjustable, height 200 mm, diameter 67 mm it is avalible only with RB. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDH
360-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360 V
360 V

Roller of roller table RDT put into gap.

O
360-QPARTS

Set of easy worn away spare parts:
* 6 pcs: hard-metal plate side LNKW 19-1198000, HF10
* 6 pcs: screw for vidia plates US14
* 8 pcs: bearing 6202 2RS
* 20 pcs: cleaning brush

O
360-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  4780x34x1,1 

O
360-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  4780x34x1,1 

O
360-NAV

Manual instruction – printed version.

O
PAL4

Packing on the palette 1,5 m x 3,5 m.

O
360-V

Roller of roller table RDT put into gap.

O
360x500 GH-LR
Code Description Type
M2V

Engine with the gear box- 2 speed

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
360-SRZ-R

Vice behind the cut

OP
360-RP

Manual upper vice. 

OP
LIGHT L1

Lighting of working space.

OP
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
VD-2000/520/60/6 O
VD-2000/520/60/10 O
VD-V-520
VD-V-520

Aditional cylinder, lenght 520 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
360-RDT 1000/520
360-RDT 1000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 1000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDT 2000/520
360-RDT 2000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 2000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDM 2000/520
360-RDM 2000/520

Input or output robust roller conveyor with driven rollers. Driving by electrical engine, vorm gearbox and inverter. By chain are driving cylinders. Width of cylinders 520 mm, length 2000 mm, capacity 1000 kg/m.  Impossibile use for automatical saws CNC !!!

OP
360-RDML 2000/520
360-RDML 2000/520

Input or output robust roller conveyor with driven rollers. Driving from RDM  throught  chain. Width of cylinders 520 mm, length 2000 mm, capacity 1000 kg/m.  Impossibile use for automatical saws CNC !!!

OP
360-RDP-2000/520
360-RDP-2000/520

Input robust connecting conveyor, there is a special shape for angle turning of the machine (it is neccessary for cutting angle - 60°) with a gutter which prevents leakage of emulsion on the floor. Width of  cylinders 520 mm, length 2000 mm. 

O
360-RDPM-2000/520
360-RDPM-2000/520

Input robust connecting conveyor with the drive, there is a special shape for angle turning of the machine  (it is neccessary for cutting angle - 60°). Electroengine with the worm gearbox drives three firm rollers and it is also the source of energy for RDM-L. Lenght 2000 mm, width 520 mm. 

O
360-RDZ-2000/520
360-RDZ-2000/520

Output robust connecting conveyor, there is a special shape for angle turning of the machine. With a gutter which prevents leakage of emulsion on the floor. Width of  cylinders 520 mm, length 2000 mm.  

O
360-RDZM-2000/520
360-RDZM-2000/520

Output robust connecting conveyor with the drive, there is a special shape for angle turning of the machine  (it is neccessary for cutting angle + 60°). Electroengine with the worm gearbox drives three firm rollers and it is also the source of energy for RDM-L. Lenght 2000 mm, width 520 mm. 

O
360-RB
360-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 520 mm, monted to the convoyer RDT. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RBS
360-RBS

Side movable cylinder for preparation of bundles, adjustable, height 200 mm, diameter 67 mm it is avalible only with RB. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDH
360-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360 V
360 V

Roller of roller table RDT put into gap.

O
OZP
OZP

Mechanical fixed stop with ruler and scale line 2 meters long. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
OZP-D
OZP-D

Mechanical fixed stop with digital display 2 meters long. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
OZS
OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
OZS-D
OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops.

O
OZP-L

2 meters long extension of OZP.

O
OZD-L

2 meters long extension of OZD.

O
360-QPARTS

Set of easy worn away spare parts:
* 6 pcs: hard-metal plate side LNKW 19-1198000, HF10
* 6 pcs: screw for vidia plates US14
* 8 pcs: bearing 6202 2RS
* 20 pcs: cleaning brush

O
360-NAV

Manual instruction – printed version.

O
PAL4

Packing on the palette 1,5 m x 3,5 m.

O
360x500 SHI-LR
Code Description Type
MITSUBISHI
MITSUBISHI

Controling system MITSUBISHI.

ST
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
360-IPB

Electronical indication position of the bow

ST
PUD

Digital indicator of adjusted angle

ST
360-SRZ

Vice behind the cut. hydraulic clamping of the material behind the cut.

OP
360-HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

OP
360-RTS

Regulation press of vice.

OP
LIGHT L1

Lighting of working space.

OP
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
VD-2000/520/60/6 O
VD-2000/520/60/10 O
VD-V-520
VD-V-520

Aditional cylinder, lenght 520 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
360-RDT 1000/520
360-RDT 1000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 1000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDT 2000/520
360-RDT 2000/520

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 520 mm, length 2000 mm, it is possible to put them for RDP or RDZ,capacity 1000 kg/m. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDM 2000/520
360-RDM 2000/520

Input or output robust roller conveyor with driven rollers. Driving by electrical engine, vorm gearbox and inverter. By chain are driving cylinders. Width of cylinders 520 mm, length 2000 mm, capacity 1000 kg/m.  Impossibile use for automatical saws CNC !!!

O
360-RDML 2000/520
360-RDML 2000/520

Input or output robust roller conveyor with driven rollers. Driving from RDM  throught  chain. Width of cylinders 520 mm, length 2000 mm, capacity 1000 kg/m.  Impossibile use for automatical saws CNC !!!

O
360-RDP-2000/520
360-RDP-2000/520

Input robust connecting conveyor, there is a special shape for angle turning of the machine (it is neccessary for cutting angle - 60°) with a gutter which prevents leakage of emulsion on the floor. Width of  cylinders 520 mm, length 2000 mm. 

O
360-RDPM-2000/520
360-RDPM-2000/520

Input robust connecting conveyor with the drive, there is a special shape for angle turning of the machine  (it is neccessary for cutting angle - 60°). Electroengine with the worm gearbox drives three firm rollers and it is also the source of energy for RDM-L. Lenght 2000 mm, width 520 mm. 

O
360-RDZ-2000/520
360-RDZ-2000/520

Output robust connecting conveyor, there is a special shape for angle turning of the machine. With a gutter which prevents leakage of emulsion on the floor. Width of  cylinders 520 mm, length 2000 mm.  

O
360-RDZM-2000/520
360-RDZM-2000/520

Output robust connecting conveyor with the drive, there is a special shape for angle turning of the machine  (it is neccessary for cutting angle + 60°). Electroengine with the worm gearbox drives three firm rollers and it is also the source of energy for RDM-L. Lenght 2000 mm, width 520 mm. 

O
360-RB
360-RB

Side support fixed cylinder, height 200 mm, diameter 67 mm including support - length 520 mm, monted to the convoyer RDT. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RBS
360-RBS

Side movable cylinder for preparation of bundles, adjustable, height 200 mm, diameter 67 mm it is avalible only with RB. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360-RDH
360-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
360 V
360 V

Roller of roller table RDT put into gap.

O
360-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!!  IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT

O
360-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
360-OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
360-OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Works only with OZSD-L.

O
OZP-L

2 meters long extension of OZP.

O
OZD-L

2 meters long extension of OZD.

O
360-OZP-L-RDZ

Measuring system for OZP mounted on FIRST roller table.

O
360-OZP-LE-RDZ

Measuring system for OZP mounted on FIRST AND EITHER LAST roller table.

O
360-OZD-L-RDZ

Measuring system for OZD mounted on FIRST roller table.

O
360-OZD-LE-RDZ

Measuring system for OZD mounted on FIRST AND EITHER LAST roller table.

O
360-OZS-L-RDZ

Measuring system for OZS mounted on FIRST roller table.

O
360-OZS-LE-RDZ

Measuring system for OZS mounted on FIRST AND EITHER LAST roller table.

O
360-OZSD-L-RDZ

Measuring system for OZS-D mounted on FIRST roller table.

O
360-OZSD-LE-RDZ

Measuring system for OZS-D mounted on FIRST AND EITHER LAST roller table.

O
360-OZP-L 1000

Measuring system for OZP mounted on 1 m roller table.

O
360-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
360-OZP-LE 1000

Measuring system for OZP mounted on LAST 1 m roller table  in the setup.

O
360-OZP-LE 2000

Measuring system for OZP mounted on LAST 2m roller table in the setup.

O
360-OZD-L 1000

Measuring system for OZD mounted on 1 m roller table.

O
360-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
360-OZD-LE 1000

Measuring system for OZD mounted on LAST 1 m roller table in the setup

O
360-OZD-LE 2000

Measuring system for OZD mounted on LAST 2 m roller table in the setup.

O
360-OZS-L 1000

Measuring system for OZS mounted on 1 m roller table.

O
360-OZS-L 2000

Measuring system for OZS mounted on 2 m roller table.

O
360-OZS-LE 1000

Measuring system for OZS mounted on LAST 1 m roller table  in the setup.

O
360-OZS-LE 2000

Measuring system for OZS mounted on LAST 2 m roller table in the setup.

O
360-OZSD-L 1000

Measuring system for OZS-D mounted on 1 m roller table.

O
360-OZSD-L 2000

Measuring system for OZS-D mounted on 2 m roller table.

O
360-OZSD-LE 1000

Measuring system for OZS-D mounted on LAST 1 m roller table  in the setup.

O
360-OZSD-LE 2000

Measuring system for OZS-D mounted on LAST 2 m roller table in the setup.

O
360-QPARTS

Set of easy worn away spare parts:
* 6 pcs: hard-metal plate side LNKW 19-1198000, HF10
* 6 pcs: screw for vidia plates US14
* 8 pcs: bearing 6202 2RS
* 20 pcs: cleaning brush

O
360-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  4780x34x1,1 

O
360-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  4780x34x1,1 

O
360-NAV

Manual instruction – printed version.

O
PAL4

Packing on the palette 1,5 m x 3,5 m.

O
360-V

Roller of roller table RDT put into gap.

O
400 PROFI A-CNC
Code Description Type
A-CNC MITSUBISHI

Controling systém A-CNC MITSUBISHI.

ST
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
LED

Lighting of workink space.

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
410-DPP

Automatic end stop of the upper position.

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
RTR

Rugulation press of arm. Cutting conditions optimalization (regulates force that push the blade to the material so this function increases blade lifespan).

ST
RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

ST
410-GPZ

Slide for cutted peaces.

ST
410-NPH

Hydraulic tension of band.

ST
410-VTS

Worm chip extraktor,including 1 Pc of BOX-TRI.

ST
410-VTT

Worm chip extractor for long chips (stainless-chips), includedd 1 pc of BOX-TRI.

OP
410-IRP

Down shift speed indication value on the display of controling system ( mm/min )

OP
410-HP-A

Hydraulical upper vice for mounted on the main vice and on the feeding vice.  Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder. Set of 2 pcs. 

OP
410-ECK

Cleaning brush of blade driven actively by motor.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
LASER LINE

Laser indicator of cut position.

OP
MINI LUBE 27-34

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

O
VD-2000/420/60/6 O
VD-V-420

Aditional cylinder, lenght 420 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
410-RDT 1000/450
410-RDT 1000/450

Input or output robust roller table with a gutter which prevents leakage of emulsion on the floor, width of cylinders 450 mm, length 1000 mm, capacity 1000 kg/m.

O
410-RDT 2000/450
410-RDT 2000/450

Input or output robust roller table with a gutter which prevents leakage of emulsion on the floor.  Width of cylinders 450 mm, length 2000 mm,capacity 1000 kg/m.

O
410-RDZ 1000/450

Output  roller conveyor that is neccesary for making angle cuts and for connection  to RDT,RDM.  Piece of equipment  is also a connecting desk for connection with the vice. Lenght 2000 mm, with 450 mm, 7 rollers, bearing capacity 1000 kg/m.

O
VZM-450

The cylinder of rollertable, which is driven by electroengine, width 450 mm, is able to lift the material hydraulically above the level of other rollers. Working only with RDT insta 2 Pc of original cylinders. Control of the roller is independent on the controlling of the machine, the roller has its own controlling panel.

OP
410-V

Roller of roller table RDT put into gap.

O
410-V-NI

Nitrided roller– timber profile, length 450. Charge for nitridezation of one roller 

O
410-RBR

Side support fixed cylinder, height 280 mm, diameter 67 mm with its own frame, mounted to roller tables RDT.

O
410-RBRS

Side adjustable roller,  with its own steel frame, and with the movable leading 450 mm, fixed by 2 pcs of T-nuts. Height 280 mm, diameter 67 mm.

O
410-CSV

Hydraulical shift for the RBRS roller including assambly of electrical and hydraulical instalation. Possibile only with RBRS

OP
410-RDH
410-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg.

O
410-QPARTS

Set of easy worn away spare parts:
* 6 pcs: hard-metal plate side LNKW 19-1198000, HF10
* 6 pcs: screw for vidia plates US14
* 8 pcs: bearing 6202 2RS
* 20 pcs: cleaning brush

O
400-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  4520x34x1,1

O
400-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  Rozměr: 4520x34x1,1.

O
410-NAV

Manual instruction – printed version.

O
PAL2

Packing on the palette 2,4 m x 2,4 m.

O
OBAL2

Package - wooden box 2,4 m x 2,4 m.

O
400x400 HERKULES X-CNC
Code Description Type
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
PCP

One year subscription for external machine programming (for Siemens control system) using www server.

OP
BLUEBOX

Router for remote saw service.

OP
LED

Lighting of workink space.

ST
NPH

Hydraulic tension of band.

ST
400-VTT

Worm chip extractor for long chips (stainless-chips), includedd 1 pc of BOX-TRI.

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
400-DPP

Automatic end stop of the upper position.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

ST
ECK

Cleaning brush of blade driven actively by motor.

ST
CMU-1

Opening of cutting zone from feeder side. Without contact moving of blade to upper position.

ST
OCP

Rebounding jaw of feeder vice. Controled by short-stroke cylinder, placed on linear leading.

ST
OCS

Rebounding jaw of stationary vice. Controls by short-stroke cylinder, placed on linear leading. 

OP
ATB

Automatic feed of the material precisely  into the cutting zone.

OP
400-KKR

Check of cut perpendicularity.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
400-HPR-A

Hydraulic upper clamping. Jaw clamps material in vertical direction using hydraulic cylinder and two axis of linear leading. Set of 2 pcs.  

OP
MINI LUBE 41

Wasteless lubricating system – 2 pumps, for blade 41 mm. Instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
400-RDP 1000/450

Special input roller conveyor, with a gutter which prevents leakage of emulsion on the floor. Width of cylinders 450 mm, length 1000 mm, 6 rollers, capacity 1000 kg/m. 

O
400-RDZ 1000/450

Special output roller conveyor, with a gutter which prevents leakage of emulsion on the floor. Width of cylinders 450 mm, length 1000 mm, 6 rollers, capacity 1000 kg/m. 

O
400-RDT 1000/450
400-RDT 1000/450

Input or output robustroller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 450 mm, length 1000 mm, capacity 1000 kg/m.

O
400-RDT 2000/450
400-RDT 2000/450

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 450 mm, length 1000 mm, capacity 1000 kg/m.

O
VZM-450

The cylinder of rollertable, which is driven by electroengine, width 450 mm, is able to lift the material hydraulically above the level of other rollers. Working only with RDT insta 2 Pc of original cylinders. Control of the roller is independent on the controlling of the machine, the roller has its own controlling panel.

OP
400-RDH

Independent  movable cylinder, adjustable height, capacity 1000kg.

O
400-V O
400-V-NI

Nitrided roller– timber profile, length 450. Charge for nitridezation of one roller 

O
400-RBR

Side support fixed cylinder, height 280 mm, diameter 67 mm with its own frame, mounted to roller tables RDT.

O
400-RBRS

Side adjustable roller,  with its own steel frame, and with the movable leading 450 mm, fixed by 2 pcs of T-nuts. Height 280 mm, diameter 67 mm.

O
400-CSV

Hydraulical shift for the RBRS roller including assambly of electrical and hydraulical instalation. Possibile only with RBRS

OP
400-QPARTS

Set of easy worn away spare parts :
* 8 pcs: hard-metal plate side 765000, HF10
* 2 pcs: hard-metal plate upper LNKW 19, HF10
* 2 pcs: screw for vidia plates US14
* 8 pcs: bearing 6003 2RS
* 10 pcs: cleaning brush

O
400x400-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  5580x41x1,3

O
400x400-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  5580x41x1,3

O
400–NAV

Manual instruction – printed version.

O
400-ATB

Automatic feed of the material precisely  into the cutting zone.

OP
440x600 HORIZONTAL SHI
Code Description Type
MITSUBISHI
MITSUBISHI

Controling system MITSUBISHI.

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
LED

Lighting of workink space.

ST
PUD

Digital indicator of adjusted angle

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
440x600-IRP

Down shift speed indication value on the display of controling system ( mm/min )

ST
440x600-PVP

Supportin cylinder , situated on the base of the saw on the linear feeding - Inpout side.

ST
440x600-PVZ

Supportin cylinder , situated on the base of the saw on the linear feeding - outpud side.

ST
RTR

Rugulation press of arm. Cutting conditions optimalization (regulates force that push the blade to the material so this function increases blade lifespan).

ST
440x600-RTS

Regulation press of vice.

ST
440x600-NPH

Hydraulic tension of band.

OP
440x600-PUH

Hydraulical side moving of bow with hydraulically locking of setting angle.

ST
440x600-VTT

Worm chip extractor for long chips (stainless-chips), includedd 1 pc of BOX-TRI.

OP
440x600-VTT-D

Additional chips extractor suitable for long swarfs. It enables transport of swarfs to 730 mm height.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
440x600-HPP

Hydraulic upper clamping tighten the material in vertical sense by the short step hydraulic cylinder connected with the cylinder of the main vice.

OP
MINI LUBE
MINI LUBE

Wasteless lubricating system, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
VD-2000/620/89/6 O
VD-V-620
VD-V-620

Aditional cylinder, lenght 620 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
500-RDT 1000/620
500-RDT 1000/620

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 1000 mm, width of cylinders 620 mm, 3 rollers, capacity 1700 kg/m.  

O
500-RDT 2000/620
500-RDT 2000/620

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 2000 mm, width of cylinders 620 mm, 5 rollers, capacity 1700 kg/m.

O
440x600-RDP-800/620

Input robust connecting conveyor that is neccesary for making angle cuts and for connection to RDT, RDM. Lenght 800 mm, width of cylinders 620 mm, 5 rollers, capacity 1700 kg/m.

O
440x600-RDZ-800/620

Output robust connecting conveyor, there is a special shape for angle turning of the machine and for connection  to RDT, RDM. Lenght 800 mm, width of cylinders 620 mm, 5 rollers, capacity 1700 kg/m.

O
VZM-620 OP
500-RBR

Side support fixed cylinder, height 280 mm, diameter 87 mm with its own frame, mounted to roller tables RDT.

O
500-RBRS

Side adjustable roller,  with its own steel frame, and with the movable leading 620 mm, fixed by 2 pcs of T-nuts. Height 280 mm, diameter 87 mm.

O
440x600 RB-RDP

Vertical side cylinder for roller table 440x600 RDP.

O
500-RDH
500-RDH

Independent  movable cylinder, adjustable height, capacity 1000kg.

O
440x600 V-300-RDP

Additional cylinder for roller table RDP. Lenght 300 mm

O
440x600 V-620-RDP

Additional cylinder for roller table RDP. Lenght 600 mm

O
500-V

Roller of roller table RDT put into gap.

O
OZP
OZP

Mechanical fixed stop with ruler and scale line 2 meters long. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
OZP-D
OZP-D

Mechanical fixed stop with digital display 2 meters long. INPOSIBLE ASSAMBLE ON VD1 ROLLERTABLES.

O
OZS
OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
OZS-D
OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops.

O
OZP-L

2 meters long extension of OZP.

O
OZD-L

2 meters long extension of OZD.

O
440-QPARTS

Set of easy worn away spare parts :
* 6 pcs: hard-metal plate side LNKW 19-1198000, HF10
* 6 pcs: screw for vidia plates US14
* 8 pcs: bearing 6202 2RS
* 20 pcs: cleaning brush

O
440x600-NAV

Manual instruction – printed version.

O
PAL4

Packing on the palette 1,5 m x 3,5 m.

O
440-QPARTS 2 O
440-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  6060x34x1,1

O
440-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth. 6060x34x1,1  

O
440x600-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!!  IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
440x600-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
440x600-OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
440x600-OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Works only with OZSD-L.

O
440x600-OZP-L-RDZ

Measuring system for OZP mounted on FIRST roller table.

O
440x600-OZP-LE-RDZ

Measuring system for OZP mounted on FIRST AND EITHER LAST roller table.

O
440x600-OZD-L-RDZ

Measuring system for OZD mounted on FIRST roller table.

O
440x600-OZD-LE-RDZ

Measuring system for OZD mounted on FIRST AND EITHER LAST roller table.

O
440x600-OZS-L-RDZ

Measuring system for OZS mounted on FIRST roller table.

O
440x600-OZS-LE-RDZ

Measuring system for OZS mounted on FIRST AND EITHER LAST roller table.

O
440x600-OZSD-L-RDZ

Measuring system for OZS-D mounted on FIRST roller table.

O
440x600-OZSD-LE-RDZ

Measuring system for OZS-D mounted on FIRST AND EITHER LAST roller table.

O
440x600-OZP-L 1000

Measuring system for OZP mounted on 1 m roller table.

O
440x600-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
440x600-OZP-LE 1000

Measuring system for OZP mounted on LAST 1 m roller table  in the setup.

O
440x600-OZP-LE 2000

Measuring system for OZP mounted on LAST 2m roller table in the setup.

O
440x600-OZD-L 1000

Measuring system for OZD mounted on 1 m roller table.

O
440x600-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
440x600-OZD-LE 1000

Measuring system for OZD mounted on LAST 1 m roller table  in the setup.

O
440x600-OZD-LE 2000

Measuring system for OZD mounted on LAST 2 m roller table in the setup.

O
440x600-OZS-L 1000

Measuring system for OZS mounted on 1 m roller table.

O
440x600-OZS-L 2000

Measuring system for OZS mounted on 2 m roller table.

O
440x600-OZS-LE 1000

Measuring system for OZS mounted on LAST 1 m roller table  in the setup.

O
440x600-OZS-LE 2000

Measuring system for OZS mounted on LAST 2 m roller table in the setup.

O
440x600-OZSD-L 1000

Measuring system for OZS-D mounted on 1 m roller table.

O
440x600-OZSD-L 2000

Measuring system for OZS-D mounted on 2 m roller table.

O
440x600-OZSD-LE 1000

Measuring system for OZS-D mounted on LAST 1 m roller table  in the setup.

O
440x600-OZSD-LE 2000

Measuring system for OZS-D mounted on LAST 2 m roller table in the setup.

O
440x600-RDT-XY1

Roller table setup (with one motorised VZM-620). The setup has total Length 7500 mm. In this option is included 4 powered cross-conveyors with Length of 4000 mm. The flow of material is one way, manual control.

OP
440x600 HORIZONTAL X-NC-2000
Code Description Type
440-QPARTS 2 O
440-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  6060x34x1,1

O
440-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth. 6060x34x1,1  

O
440x600-RDT-XY1

Roller table setup (with one motorised VZM-620). The setup has total Length 7500 mm. In this option is included 4 powered cross-conveyors with Length of 4000 mm. The flow of material is one way, manual control.

OP
460x600 SHI-LR
Code Description Type
MITSUBISHI
MITSUBISHI

Controling system MITSUBISHI.

ST
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
460-IPB

Electronical indication position of the bow

ST
PUD

Digital indicator of adjusted angle

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
460-NPH

Hydraulic tension of band.

OP
460-HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

O
460-RTS

Regulation press of vice.

OP
LIGHT L1

Lighting of working space.

OP
MINI LUBE 41

Wasteless lubricating system – 2 pumps, for blade 41 mm. Instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
460-SRZ

Vice behind the cut. hydraulic clamping of the material behind the cut.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
VD-2000/620/89/6 O
VD-V-620
VD-V-620

Aditional cylinder, lenght 620 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
460-RDT 1000/620
460-RDT 1000/620

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 620 mm, length 1000 mm, it is possible to put them for RDP or RDZ, capacity 1000 kg/m.

O
460-RDT 2000/620
460-RDT 2000/620

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 620 mm, length 2000 mm, it is possible to put them for RDP or RDZ ,capacity 1000 kg/m.

O
460-RDM 2000/620
460-RDM 2000/620

Input or output robust roller conveyor with driven rollers. Driving by electric engine, vorm gearbox and converter. By chain are driving cylinders. Width of cylinders 620 mm, length 2000 mm, capacity 1700 kg/m. 

O
460-RDML 2000/620

Input or output robust roller table with driven rollers. Driving from RDM throught  chain. Width of cylinders 620 mm, length 2000 mm, capacity 1700 kg/m. Impossibile use for automatical saws CNC !!!

O
VZM-620 OP
460-RDP-2000

Input robust connecting conveyor, there is a special shape for angle turning of the machine (it is neccessary for cutting angle - 60°).  With a gutter which prevents leakage of emulsion on the floor. Width of  cylinders 620 mm, length 2000 mm. 

O
460-RDZ-2000

Output robust connecting conveyor, there is a special shape for angle turning of the machine. With a gutter which prevents leakage of emulsion on the floor. Width of cylinders 620 mm, length 2000 mm.  

O
460-RBR

Side support fixed cylinder, height 280 mm, diameter 87 mm with its own frame, mounted to roller tables RDT.

O
460-RBRS

Side adjustable roller,  with its own steel frame, and with the movable leading 620 mm, fixed by 2 pcs of T-nuts. Height 280 mm, diameter 87 mm.

O
460-RDH
460-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg.

O
460 V

Roller of roller table RDT put into gap.

O
460-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!!  IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
460-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
460-OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
460-OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Works only with OZSD-L.

O
460-OZP-L-RDZ

Measuring system for OZP mounted on FIRST roller table.

O
460-OZP-LE-RDZ

Measuring system for OZP mounted on FIRST AND EITHER LAST roller table.

O
460-OZD-L-RDZ

Measuring system for OZD mounted on FIRST roller table.

O
460-OZD-LE-RDZ

Measuring system for OZD mounted on FIRST AND EITHER LAST roller table.

O
460-OZS-L-RDZ

Measuring system for OZS mounted on FIRST roller table.

O
460-OZS-LE-RDZ

Measuring system for OZS mounted on FIRST AND EITHER LAST roller table.

O
460-OZSD-L-RDZ

Measuring system for OZS-D mounted on FIRST roller table.

O
460-OZSD-LE-RDZ

Measuring system for OZS-D mounted on FIRST AND EITHER LAST roller table.

O
460-OZP-L 1000

Measuring system for OZP mounted on 1 m roller table.

O
460-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
460-OZP-LE 1000

Measuring system for OZP mounted on LAST 1 m roller table  in the setup.

O
460-OZP-LE 2000

Measuring system for OZP mounted on LAST 2m roller table in the setup.

O
460-OZD-L 1000

Measuring system for OZD mounted on 1 m roller table.

O
460-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
460-OZD-LE 1000

Measuring system for OZD mounted on LAST 1 m roller table  in the setup.

O
460-OZD-LE 2000

Measuring system for OZD mounted on LAST 2 m roller table in the setup.

O
460-OZS-L 1000

Measuring system for OZS mounted on 1 m roller table.

O
460-OZS-L 2000

Measuring system for OZS mounted on 2 m roller table.

O
460-OZS-LE 1000

Measuring system for OZS mounted on LAST 1 m roller table  in the setup.

O
460-OZS-LE 2000

Measuring system for OZS mounted on LAST 2 m roller table in the setup.

O
460-OZSD-L 1000

Measuring system for OZS-D mounted on 1 m roller table.

O
460-OZSD-L 2000

Measuring system for OZS-D mounted on 2 m roller table.

O
460-OZSD-LE 1000

Measuring system for OZS-D mounted on LAST 1 m roller table  in the setup.

O
460-OZSD-LE 2000

Measuring system for OZS-D mounted on LAST 2 m roller table in the setup.

O
460-QPARTS

Set of easy worn away spare parts :
* 8 pcs: hard-metal plate side 765000, HF10
* 2 pcs: hard-metal plate upper LNKW 19-1198000, HF10
* 2 pcs: screw for vidia plates US14
* 8 pcs: bearing 6003 2RS
* 20 pcs: cleaning brush

O
460-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  5380x41x1,3 

O
460-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  5380x41x1,3

O
460-NAV

Manual instruction – printed version.

O
PAL4

Packing on the palette 1,5 m x 3,5 m.

O
500x750 HORIZONTAL SHI II Generation
Code Description Type
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
Motor with power 5,5 kW

Main motor 5,5 kW + right angle  shaft gear  reducer

ST
MITSUBISHI
MITSUBISHI

Controling system MITSUBISHI.

ST
PUD

Digital indicator of adjusted angle

ST
LED

Lighting of workink space.

ST
500X750-IRP

Down shift speed indication value on the display of controling system ( mm/min )

ST
PEGAS-BRP

Electronical regulation of the down-shift.

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
500x750-PVP

Supportin cylinder , situated on the base of the saw on the linear feeding - Inpout (left) side.

ST
500x750-PVZ

Supportin cylinder , situated on the base of the saw on the linear feeding - outpud (right) side.

ST
RTR

Rugulation press of arm. Cutting conditions optimalization (regulates force that push the blade to the material so this function increases blade lifespan).

ST
RTS

Regulation press of vice.

ST
500x750-PUH

Hydraulical side moving of bow with hydraulically locking of setting angle.

ST
500x750-SRZ-Z-HP

Ditional vice with upper clamping placed at RDT conveyors behind the cut.

OP
500x750-NPH

Hydraulic tension of band.

OP
500x750-ECK

Cleaning brush of blade driven actively by motor.

OP
500x750-VTT

Chips ectractor for long swarfs. With box-tri included.

OP
500x750-VTT-D

Additional chips extractor suitable for long swarfs. It enables transport of swarfs to 730 mm height.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
500x750-HP

Hydraulic upper clamping tighten the material in vertical sense by the short step hydraulic cylinder connected with the cylinder of the main vice.

OP
MINI LUBE 41

Wasteless lubricating system – 2 pumps, for blade 41 mm. Instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
VD-2000/800/89/6 O
VD-V-800

Aditional cylinder, lenght 780 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
500x750-RDT 1000/800
500x750-RDT 1000/800

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 1000 mm,  width of cylinders 800 mm, capacity 1700 kg/m.

O
500x750-RDT 2000/800
500x750-RDT 2000/800

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 2000 mm,  width of cylinders 800 mm, capacity 1700 kg/m.

O
500x750-RDM 2000/800
500x750-RDM 2000/800

Input or output robust roller conveyor with driven rollers . Driving by electrical engine, vorm gearbox and inverter. By chain are driving cylinders. Width of cylinders 800 mm, length 2000 mm, capacity 1700 kg/m. Impossibile use for automatical saws CNC !!!

OP
500x750-RDML 2000/800

Input or output robust roller conveyor with driven rollers. Driving from RDM throught  chain. Width of cylinders 800 mm, length 2000 mm, capacity 1700 kg/m. Impossibile use for automatical saws CNC !!!

OP
500x750-RDP-800

Input conveyor for connecting with machine. Operator sets all rolles to be suitable with cuted material. Conveyor ensures angular cuts. Conveyor is with 3 rollers L 390, 2 rollers L 811. Loading capacity 1700 kg.

O
500x750-RDZ-800

Output conveyor for connecting with machine. Operator sets all rolles to be suitable with cuted material. Conveyor ensures angular cuts. Conveyor is with 3 rollers L 390, 2 rollers L 811. Loading capacity 1700 kg.

O
VZM-800

Driven cylinder (by electromotor) width 800 mm with hydraulic lifting of material above level of standard rollers. Fixed on RDT insted of two rollers.

OP
500x750-RBR

Side support fixed cylinder, height 280 mm, diameter 92 mm with its own frame, mounted to roller tables RDT.

O
500x750-RBRS

Side adjustable roller with its own steel frame, and with the movable leading 800 mm, fixed by 2 pcs of T-nuts. Height 280 mm, diameter 92 mm.

O
500x750-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg.

O
500x750 V

Roller of roller table RDT put into gap.

O
500x750-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!!  IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
500x750-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
500x750-OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
500x750-OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Works only with OZSD-L.

O
500x750-OZP-L-RDZ

Measuring system for OZP mounted on FIRST roller table.

O
500x750-OZP-LE-RDZ

Measuring system for OZP mounted on FIRST AND EITHER LAST roller table.

O
500x750-OZD-L-RDZ

Measuring system for OZD mounted on FIRST roller table.

O
500x750-OZD-LE-RDZ

Measuring system for OZD mounted on FIRST AND EITHER LAST roller table.

O
500x750-OZS-L-RDZ

Measuring system for OZS mounted on FIRST roller table.

O
500x750-OZS-LE-RDZ

Measuring system for OZS mounted on FIRST AND EITHER LAST roller table.

O
500x750-OZSD-L-RDZ

Measuring system for OZS-D mounted on FIRST roller table.

O
500x750-OZSD-LE-RDZ

Measuring system for OZS-D mounted on FIRST AND EITHER LAST roller table.

O
500x750-OZP-L 1000

Measuring system for OZP mounted on 1 m roller table.

O
500x750-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
500x750-OZP-LE 1000

Measuring system for OZP mounted on LAST 1 m roller table  in the setup.

O
500x750-OZP-LE 2000

Measuring system for OZP mounted on LAST 2m roller table in the setup.

O
500x750-OZD-L 1000

Measuring system for OZD mounted on 1 m roller table.

O
500x750-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
500x750-OZD-LE 1000

Measuring system for OZD mounted on LAST 1 m roller table  in the setup.

O
500x750-OZD-LE 2000

Measuring system for OZD mounted on LAST 2 m roller table in the setup.

O
500x750-OZS-L 1000

Measuring system for OZS mounted on 1 m roller table.

O
500x750-OZS-L 2000

Measuring system for OZS mounted on 2 m roller table.

O
500x750-OZS-LE 1000

Measuring system for OZS mounted on LAST 1 m roller table  in the setup.

O
500x750-OZS-LE 2000

Measuring system for OZS mounted on LAST 2 m roller table in the setup.

O
500x750-OZSD-L 1000

Measuring system for OZS-D mounted on 1 m roller table.

O
500x750-OZSD-L 2000

Measuring system for OZS-D mounted on 2 m roller table.

O
500x750-OZSD-LE 1000

Measuring system for OZS-D mounted on LAST 1 m roller table  in the setup.

O
500x750-OZSD-LE 2000

Measuring system for OZS-D mounted on LAST 2 m roller table in the setup.

O
500x750-RDT-XY1

Roller table setup (with one motorised VZM-800). The setup has total Length 7500 mm. In this option is included 4 powered cross-conveyors with Length of 4000 mm. The flow of material is one way, manual control.

OP
500x750-QPARTS 2

Service assembly of middle part of the base, including cutting channel bar.

O
500x750-QPARTS

Set of easy worn away spare parts :
* 8 pcs: hard-metal plate side 765000, HF10
* 2 pcs: hard-metal plate upper LNKW 19-1198000, HF10
* 2 pcs: screw for vidia plates US14
* 8 pcs: bearing 6003 2RS
* 20 pcs: cleaning brush

O
500x750-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  6500x41x1,3

O
500x750-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  6500x41x1,3

O
500x750-NAV

Manual instruction – printed version.

O
PAL4

Packing on the palette 1,5 m x 3,5 m.

O
500x750 HORIZONTAL X II Generation
Code Description Type
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

O
Motor with power 5,5 kW

Main motor 5,5 kW + right angle  shaft gear  reducer

ST
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
PCP

One year subscription for external machine programming (for Siemens control system) using www server.

OP
BLUEBOX

Router for remote saw service.

OP
PUD

Digital indicator of adjusted angle

ST
LED

Lighting of workink space.

ST
500X750-IRP

Down shift speed indication value on the display of controling system ( mm/min )

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
500x750-PVP

Supportin cylinder , situated on the base of the saw on the linear feeding - Inpout (left) side.

ST
500x750-PVZ

Supportin cylinder , situated on the base of the saw on the linear feeding - outpud (right) side.

ST
RTS

Regulation press of vice.

ST
500x750-PUH

Hydraulical side moving of bow with hydraulically locking of setting angle.

ST
500x750-SRZ-Z-HP

Ditional vice with upper clamping placed at RDT conveyors behind the cut.

OP
500x750-NPH

Hydraulic tension of band.

OP
500x750-ECK

Cleaning brush of blade driven actively by motor.

OP
500x750-VTT

Chips ectractor for long swarfs. With box-tri included.

OP
500x750-VTT-D

Additional chips extractor suitable for long swarfs. It enables transport of swarfs to 730 mm height.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
500x750-HP

Hydraulic upper clamping tighten the material in vertical sense by the short step hydraulic cylinder connected with the cylinder of the main vice.

OP
MINI LUBE 41

Wasteless lubricating system – 2 pumps, for blade 41 mm. Instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
VD-2000/800/89/6 O
VD-V-800

Aditional cylinder, lenght 780 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
500x750-RDT 1000/800
500x750-RDT 1000/800

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 1000 mm,  width of cylinders 800 mm, capacity 1700 kg/m.

O
500x750-RDT 2000/800
500x750-RDT 2000/800

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 2000 mm,  width of cylinders 800 mm, capacity 1700 kg/m.

O
500x750-RDM 2000/800
500x750-RDM 2000/800

Input or output robust roller conveyor with driven rollers . Driving by electrical engine, vorm gearbox and inverter. By chain are driving cylinders. Width of cylinders 800 mm, length 2000 mm, capacity 1700 kg/m. Impossibile use for automatical saws CNC !!!

OP
500x750-RDML 2000/800

Input or output robust roller conveyor with driven rollers. Driving from RDM throught  chain. Width of cylinders 800 mm, length 2000 mm, capacity 1700 kg/m. Impossibile use for automatical saws CNC !!!

OP
500x750-RDP-800

Input conveyor for connecting with machine. Operator sets all rolles to be suitable with cuted material. Conveyor ensures angular cuts. Conveyor is with 3 rollers L 390, 2 rollers L 811. Loading capacity 1700 kg.

O
500x750-RDZ-800

Output conveyor for connecting with machine. Operator sets all rolles to be suitable with cuted material. Conveyor ensures angular cuts. Conveyor is with 3 rollers L 390, 2 rollers L 811. Loading capacity 1700 kg.

O
VZM-800

Driven cylinder (by electromotor) width 800 mm with hydraulic lifting of material above level of standard rollers. Fixed on RDT insted of two rollers.

OP
500x750-RBR

Side support fixed cylinder, height 280 mm, diameter 92 mm with its own frame, mounted to roller tables RDT.

O
500x750-RBRS

Side adjustable roller with its own steel frame, and with the movable leading 800 mm, fixed by 2 pcs of T-nuts. Height 280 mm, diameter 92 mm.

O
500x750-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg.

O
500x750 V

Roller of roller table RDT put into gap.

O
500x750-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!!  IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
500x750-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L. IMPOSSIBLE ASSEMBLE ON VD1 ROLLERTABLES. POSSIBLE ONLY WITH ROLLER TABLE TYPE RDT/TDT.

O
500x750-OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
500x750-OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Works only with OZSD-L.

O
500x750-OZP-L-RDZ

Measuring system for OZP mounted on FIRST roller table.

O
500x750-OZP-LE-RDZ

Measuring system for OZP mounted on FIRST AND EITHER LAST roller table.

O
500x750-OZD-L-RDZ

Measuring system for OZD mounted on FIRST roller table.

O
500x750-OZD-LE-RDZ

Measuring system for OZD mounted on FIRST AND EITHER LAST roller table.

O
500x750-OZS-L-RDZ

Measuring system for OZS mounted on FIRST roller table.

O
500x750-OZS-LE-RDZ

Measuring system for OZS mounted on FIRST AND EITHER LAST roller table.

O
500x750-OZSD-L-RDZ

Measuring system for OZS-D mounted on FIRST roller table.

O
500x750-OZSD-LE-RDZ

Measuring system for OZS-D mounted on FIRST AND EITHER LAST roller table.

O
500x750-OZP-L 1000

Measuring system for OZP mounted on 1 m roller table.

O
500x750-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
500x750-OZP-LE 1000

Measuring system for OZP mounted on LAST 1 m roller table  in the setup.

O
500x750-OZP-LE 2000

Measuring system for OZP mounted on LAST 2m roller table in the setup.

O
500x750-OZD-L 1000

Measuring system for OZD mounted on 1 m roller table.

O
500x750-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
500x750-OZD-LE 1000

Measuring system for OZD mounted on LAST 1 m roller table  in the setup.

O
500x750-OZD-LE 2000

Measuring system for OZD mounted on LAST 2 m roller table in the setup.

O
500x750-OZS-L 1000

Measuring system for OZS mounted on 1 m roller table.

O
500x750-OZS-L 2000

Measuring system for OZS mounted on 2 m roller table.

O
500x750-OZS-LE 1000

Measuring system for OZS mounted on LAST 1 m roller table  in the setup.

O
500x750-OZS-LE 2000

Measuring system for OZS mounted on LAST 2 m roller table in the setup.

O
500x750-OZSD-L 1000

Measuring system for OZS-D mounted on 1 m roller table.

O
500x750-OZSD-L 2000

Measuring system for OZS-D mounted on 2 m roller table.

O
500x750-OZSD-LE 1000

Measuring system for OZS-D mounted on LAST 1 m roller table  in the setup.

O
500x750-OZSD-LE 2000

Measuring system for OZS-D mounted on LAST 2 m roller table in the setup.

O
500x750-RDT-XY1

Roller table setup (with one motorised VZM-800). The setup has total Length 7500 mm. In this option is included 4 powered cross-conveyors with Length of 4000 mm. The flow of material is one way, manual control.

OP
500x750-QPARTS 2

Service assembly of middle part of the base, including cutting channel bar.

O
500x750-QPARTS

Set of easy worn away spare parts :
* 8 pcs: hard-metal plate side 765000, HF10
* 2 pcs: hard-metal plate upper LNKW 19-1198000, HF10
* 2 pcs: screw for vidia plates US14
* 8 pcs: bearing 6003 2RS
* 20 pcs: cleaning brush

O
500x750-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  6500x41x1,3

O
500x750-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  6500x41x1,3

O
500x750-NAV

Manual instruction – printed version.

O
PAL4

Packing on the palette 1,5 m x 3,5 m.

O
500x750 HORIZONTAL X-NC-BS
Code Description Type
F

Motor and frequency converter for a fluent change of the circumferential speed of the blade.

ST
Motor with power 5,5 kW

Main motor 5,5 kW + right angle  shaft gear  reducer

ST
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
PCP

One year subscription for external machine programming (for Siemens control system) using www server.

OP
BLUEBOX

Router for remote saw service.

OP
PUD

Digital indicator of adjusted angle

ST
LED

Lighting of workink space.

ST
500X750-IRP

Down shift speed indication value on the display of controling system ( mm/min )

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
PCK

Cleaning brush of blade, driven passively (driven by pulley).

ST
500x750-PVP

Supportin cylinder , situated on the base of the saw on the linear feeding - Inpout (left) side.

ST
RTS-A

Regulation press of vice – set of 2 pcs for bothvices.

ST
500x750-PUH

Hydraulical side moving of bow with hydraulically locking of setting angle.

ST
500x750-OCP

Contactless backward move of the feeder using recoiling jaw of the feeding vice.

ST
500x750-SRZ-Z-HP

Ditional vice with upper clamping placed at RDT conveyors behind the cut.

OP
500x750-NPH

Hydraulic tension of band.

ST
500x750 RNT

Frontal safety cover.

ST
500x750 RNT-Z

Rear safety cover.

OP
500x750 RNT-L

Front safety fence for 500x750 machine with longer transporter (one segment 2000 mm).

OP
500x750 RNT-L-Z

Rear safety fence for 500x750 machine with longer transporter (one segment 2000 mm).

OP
500x750-ECK

Cleaning brush of blade driven actively by motor.

OP
500x750-VTT

Chips ectractor for long swarfs. With box-tri included.

OP
500x750-VTT-D

Additional chips extractor suitable for long swarfs. It enables transport of swarfs to 730 mm height.

OP
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
500x750-HP-A

Hydraulical upper vice for mounted on the main vice and on the feeding vice.  Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder. Set of 2 pcs. 

OP
MINI LUBE 41

Wasteless lubricating system – 2 pumps, for blade 41 mm. Instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
VD-2000/800/89/6 O
VD-V-800

Aditional cylinder, lenght 780 mm.

O
VD-VB-190
VD-VB-190

Vertical cylinder 190 mm assamblen od the VD1.

O
VD-BL
VD-BL

Support from vertical side - bearing. Assambled on VD1

O
500x750-RDT 1000/800
500x750-RDT 1000/800

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 1000 mm,  width of cylinders 800 mm, capacity 1700 kg/m.

O
500x750-RDT 2000/800
500x750-RDT 2000/800

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor. Lenght 2000 mm,  width of cylinders 800 mm, capacity 1700 kg/m.

O
500x750-RDP-800

Input conveyor for connecting with machine. Operator sets all rolles to be suitable with cuted material. Conveyor ensures angular cuts. Conveyor is with 3 rollers L 390, 2 rollers L 811. Loading capacity 1700 kg.

O
VZM-800

Driven cylinder (by electromotor) width 800 mm with hydraulic lifting of material above level of standard rollers. Fixed on RDT insted of two rollers.

OP
500x750-RBR

Side support fixed cylinder, height 280 mm, diameter 92 mm with its own frame, mounted to roller tables RDT.

O
500x750-RBRS

Side adjustable roller with its own steel frame, and with the movable leading 800 mm, fixed by 2 pcs of T-nuts. Height 280 mm, diameter 92 mm.

O
500x750-RDH

Independent  movable cylinder, adjustable height, capacity 700 kg.

O
500x750 V

Roller of roller table RDT put into gap.

O
500x750-QPARTS 2

Service assembly of middle part of the base, including cutting channel bar.

O
500x750-QPARTS

Set of easy worn away spare parts :
* 8 pcs: hard-metal plate side 765000, HF10
* 2 pcs: hard-metal plate upper LNKW 19-1198000, HF10
* 2 pcs: screw for vidia plates US14
* 8 pcs: bearing 6003 2RS
* 20 pcs: cleaning brush

O
500x750-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  6500x41x1,3

O
500x750-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  6500x41x1,3

O
500x750-NAV

Manual instruction – printed version.

O
PAL4

Packing on the palette 1,5 m x 3,5 m.

O
510x510 HERKULES X-CNC
Code Description Type
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
PCP

One year subscription for external machine programming (for Siemens control system) using www server.

OP
BLUEBOX

Router for remote saw service.

OP
510-DPP

Automatic end stop of the upper position.

ST
NPH

Hydraulic tension of band.

ST
LED