BAND SAW MACHINES

We are here to solve your cutting...

250x315 SH-LR
Previous 250x315 SH-LR / Semiautomatic band saw machine Next
mm 45° 60° -45° -60° Bundle Bundle
Tube 250 190 120 170 x x x
Rod 150* 110* 80* 110* x x x
Profile horizontal 290x200 190x140 120x140 200x70 x 200x120
*Recommended values for maximum performance of the blade.
Size image
Total power Engine power Blade speed Blade lenght Weight
3x40V 0,75/1,1 37/74 2825x27x0,9 420
Lmin Lmax Bmin Bmax Hmin Hmax V
1550 1550 750 750 1420 1420 970

Semiautomatic machine with hydraulic manipulation.
The machine is designed for cutting of material in vertical and angle cuts, angle cuts are possible to set fluently from 0 to 60 grades to the right and from 0 to 45 grades to the left.
It is suitable for piece production and small series production. Thanks to its robust construction it enables cutting of wide range of profiles and full materials. 

Control systém:

  • The machine is equipped with a control system PEGAS A2 relay logic
  • Button control

Construction:

  • The machine is constructionaly designed in that way, so that it corresponds to standard exertions in productive conditions. That is why all carrying parts are made as cast-iron castings (solidity, absorbtion of vibrations and stops). Parts of arm, vice and turn table is cust iron.
  • The arm of the machine is made of cust iron and it is designed to ensure the power and the precision of the cut. Arm is 25 grades sloped, it increases the lifetime of blade.
  • Working positions of the arm are controlled by the cam and microswitches of the upper and down position of the arm. In the end position microswitch is on, arm goes to selected upper position.
  • The arm rotated by a shaft (joint) which is support by adjustableconical bearings
  • The vice is made from cast iron. Jaws ensure safe clamping of the material.
  • The hydraulically operating vice with short travel is placed in an adjustable dovetail groove.
  • Moving jaw of the vice is manual with a wheel and trapeze thread.
  • Basic part of the vice moves according to the direction of the angle cut setting, fixation is made by the handle.
  • Turn table is cust iron.
  • Manuall turning of the table for angle cuts, angle fixation using quick clamping lever.
  • General angles are adjusted by the nonius. 

Basic equipment of machine: 

  • The blade leading in guides with hardmetal plates and leading bearings and along cast iron pulleys.
  • There is a guide situated on the firm beam on the drive side. On the tightening side there is the guide situated on the moving beam.
  • The guide beams of moving band guide is adjustable. Manual adjustment and fixing of the guide beams.
  • Guide holder moves in adjustabled dovetail groof.
  • The saw-band is equipped with a guard, which protects the operator from millings and cutting emulsion.
  • Mechanic tightening of the blade.
  • Automatic indication of blade tension.
  • A passive driven cleaning brush for perfect cleaning and function of blade.
  • Drive of machine is solved by worm gear box with pernament oil filling. Three phase engine with double winding, two cutting speeds. Termoprotection of engine.
  • The cooling system distributes cutting emulsion to the band guides.
  • Base with a tank for chips.
  • Indication of blade tightening and opening of the cover.
  • Controlling 24 V.

Basic equipment of machine: 

  • Band saw blade.
  • Set of spanners for common service.
  • Manual instructions in eletronic form (CD).

Operating cycle: 
After manual adjustment of the jaws and the arm’s operational positions the operator starts the cycle with a switch on the control panel. The hydraulic cylinder of the vice grips the material and the saw starts working. The cutting speed of the arm is controlled by a throttle valve. After finishing the cutting, the arm reaches its top operational position and the band drive stops. The vice opens and the operator can handle the material.The control system monitors correct tension of the band and correct position of the band guard.

CodeDescriptionType
A2
A2

Semiautomatical control systém A2

ST
M2V

Engine with the gear box- 2 speed

ST
OZM

Measuring end stop which is mounted directly to the machine, length 1m.

ST
250-CK

Cleaning brush of blade, driven passively by sawing blade.

ST
250-HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

O
BOX-PCS
BOX-PCS

Box for cutted pieces with emulsion draining to the waterproof tank.

O
BOX-TRI
BOX-TRI

Box for the chips with emulsion draining to the waterproof tank.

O
BOX-TAH
BOX-TAH

Tool for manipulation with BOX-PCS and BOX-TRI.

O
RD 1000/290
RD 1000/290

Roller table. Lenght 1000 mm,  width of cylinders 290 mm, capacity 200 kg/m, adjustable leg includedd in price.

O
RD 2000/290
RD 2000/290

Roller table. Lenght 2000 mm, width of cylinders 290 mm, capacity 200 kg/m, adjustable leg includedd in price.

O
RD VR-290
RD VR-290

Robust cylinder length 290 mm  with the bearing for RD roller coneyor. The capacity of roller table increased from 200 kg/m to 400 kg/m

O
RB 200
RB 200

Side vertical fix cylinder, height 200 mm, monted on the RD tables

O
RBS 200/290
RBS 200/290

Side vertical movable cylinder, height 200 mm, working only with RB.

O
RHS 290
RHS 290

Horizontal cylinder , working only together with RB + RBS for bundle fixing, length of cylinder 290 mm

O
240/250 RDZ
240/250 RDZ

Roller table. Lenght 2000 mm, width of cylinders 290 mm, capacity 200 kg/m, adjustable leg includedd in price.

O
240/250 RDP
240/250 RDP

Input connecting part of the roller conveyor RD-ensures angle cuts of the machine, length 1000 mm, width 290 mm, bearing capacity 200 kg/m, adjustable leg includedd in price 

O
OZ 1000
OZ 1000

Mechanic measuring system with the meter L = 1200 mm.

O
OZ 2000
OZ 2000

Mechanic measuring system with the meter L = 2200 mm. 

O
OZ 3000
OZ 3000

Mechanic measuring system with the meter L = 3200 mm. 

O
OZ 4000
OZ 4000

Mechanic measuring system with the meter L = 4200 mm. 

O
OZ 5000
OZ 5000

Mechanic measuring system with the meter L = 5200 mm. 

O
OZ 6000
OZ 6000

Mechanic measuring system with the meter L = 6200 mm. 

O
OZD 1000
OZD 1000

Mechanic measuring system with digital display 1 meter long.

O
OZD 2000
OZD 2000

Mechanic measuring system with digital display 2 meter long.

O
OZD 3000
OZD 3000

Mechanic measuring system with digital display 3 meter long.

O
OZD 4000
OZD 4000

Mechanic measuring system with digital display 4  meter long.

O
OZD 5000
OZD 5000

Mechanic measuring system with digital display 5 meter long.

O
OZD 6000
OZD 6000

Mechanic measuring system with digital display 6 meter long.

O
OZ 0000
OZ 0000

Second movable stop for OZ.

O
RDN
RDN

Support for RD.

O
R290

Movable cylinder, adjustable height, width 290 mm, capacity 200 kg.

O
250-QPARTS

Set of easy worn away spare parts:
* 4 pcss: hard-metal plate 235
* 4 pcss: bearing 608 2Z
* 10 pcs: cleaning brush 240-CK

O
250-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  2825x27x0,9

O
250-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth. 2825x27x0,9  

O
250 - NAV

Manual instruction – printed version

O
PAL EUR

Packing on the palette 0,8 m x1,2 m.

O
OBAL1

Package - wooden box 1,2 m x 2,0 m.

O
OBAL-250

Packing in the wooden cage.

O

Tech. data NO181-3 are valid on 1.3.2018. Producer has the right to make changes of technical data.
Values contained on this page are only for information purposes. This information is not an offer and is not a public promise. This indicative offer does not give right to close a contract. The only guiding document for the contract is a valid price list.