BAND SAW MACHINES

We are here to solve your cutting...

1200x1400 HERKULES X
Previous 1200x1400 HERKULES X / Herkules Next
mm 45° 60° -45° -60° Bundle Bundle
Tube 1200 x x x x x x
Rod 1200 x x x x x x
Profile horizontal 1200x1400 x x x x 1200x680
Total power Engine power Blade speed Blade lenght Weight
3x400V 11,0 15-80 11650x80x1,6 25000
Lmin Lmax Bmin Bmax Hmin Hmax V
5200 5200 2700 2700 2850 2850 460

Highly productive semi-automatic, hydraulically manipulated two column band saw machine. The machine is designed for vertical cuts. It is suitable for serial production and thanks to its robust construction enables to cut wide range of materials including stainless steels and tool steels both profiles and full materials.

Control systém:
Machine is equipped with programmable PLC SIEMENS SIMATIC S7-1200. Blade drive, bow movements and feeder movements are controled by SIEMENS technology.
The coloured touch screen HMI SIEMENS TP 700 COMFORT enables easy communication with an operator. It shows working conditions (blade speed, moving to the cut, cutting parameters etc.)
The machine enables to work with two modes:
SEMIAUTOMATIC CYCLE: The machine cuts the material immediatelly in a semiautomatic mode. The operator uses the feeder of the machine for the manipulation with the material and for the exact feed of the material into the cutting zone. The movement of the feeder is realized by manual buttons or by GTO function. After starting GTO function the operator sets the position of the feeder, presses START button and feeder goes to the set position.
AUTOMATIC CYCLE: the feeder feeds the material according to the set programm. The operator sets the cutting programm, machine realizes these programms, it is possible to make 200 different programms.The part of one programm is a complete setting of the cut: blade speed, feed speed, setting of an automatic regulation, setting of the hight of the bar to be cut, setting of the lenght of the bar, angles values and number of pieces. The lenght and number of pieces it is possible to set in 99 lines, the machine feeds differently set lenghts automatically. Control system shows the feasibility of the cutting by the drawings
RZP-2: cutting zones regulation. System enables to set of optimal shift speed (movement to cut) and blade speed in 5 different zones depending on blade position. An operator choose two ways of djustment: DEFENSIVE - suitable for cutting of very hard materials with carbide blades. The shift speed is slowed down on begining and ond end of cut. OFENSIVE - for productive cutting of solid round basrs. Shift speed and blade speed are raised on begining and end of the cut. It is a similar principle as ARP system. Anvantage is a possibility of blade speed regulation.
ARP = System of the automatic regulation of the cutting feed rate depending on the cutting resistance of the material or blunting the blade.
System offers two basic modes of ARP: BIMETAL and CARBIDE.
BIMETAL mode is suitable for optimalization of the cutting feed when cutting profiles by bimetal blades. The cutting feed is higher if the blade cuts sides of the profile. As the blade reaches the full material, the system reduces the cutting feed automatically so that teeth gap of the blade would not be filled.
CARBIDE mode is suitable for cutting of full bars. If the blade is old (blunt), loaded is the cutting feed reduced Reaction time is slower than in mode BIMETAL.
Cutting feed rate is regulated by control system leaded by servomotor, ball screw and KM nut enabling very precise feed rate. The operator sets in the program needed feed rate (mm/min) and the machine will set it up. Two basic regimes of automatic system regulation (ASR): ARP a RZP-2.
The control panel is placed in the tightening pulley cover. It is equipped with safety button, next buttons are for machine start and stop and other setting.
RTO function (rotate to position) with automatic setting of needed angle arm position.

Construction:
The machine is constructionaly designed in that way, so that it corresponds to extreme exertions in productive conditions. Massive construction enables using of carbid blades comfortably.
The arm of machine with columns situated as near the clamping vice as possible minimizes vibrations and enables max. cutting performance.
The arm of the machine is robust, heavy weldment and it is designed so that a toughtness and a precision of cut was ensured.
The arm moves along two columns using a four row linear leading with a high loading capacity. Arm movement using two hydraulic cylinders.
The robust steel pulleys sloped of 25 degrees regarding the level of the cut. Thanks to sloped arm the twist of the blade is eliminated and these is possibility to bring the blade closer to the minimal distance from the linear leading on columns. This arrangement eliminates vibrations and enables the max. cutting performance of the machine.
Upper position automatically using of incremental sensor for measuring of a position above material. Upper cutting position of frame is detected automaticaly using control system after setting of the size parameters of cutted material, or after pressing of button.
Down position using adjusting stop and microswitch. After reaching of bottom position arm goes to upper position automatically.
Jaws of the main vice move on two rails of linear leading using hydraulic cylinder. One jaw is longstroke (the movement by longstroke hydraulic cylinder), one is fixed.
There is a roller conveyer which supports material in whole feeded lenght. Conveyor contains driven rollers.

Basic equipment of machine:
The blade leading in guides with hardmetal plates and leading bearings and along cast iron pulleys.
There is a guide situated on the firm beam on the drive side. On the tightening side there is the guide situated on the moving beam.
The guide beams of the blade are adjustable in the whole working range. A giude moving is connected with a vice-jaw movement so that to achieve the minimum distance of the guide and material. That is why it is not neccessary to set the position manually.
Machine has hydraulic band tightening.
Automatic indication of blade tension.
A cleaning brush is driven by an electroengine and ensures perfect cleaning of a blade.
There is a planet gear box drive and a three-phase electroengine, a fluent regulation of a blade speed by a frequency converter for a fluent change of blade speed.
The cooling system for emulsion, leaded to the guides of the blade and by LocLine system directly to the cut groove.
Massive base with a tank for chips and with chip extractors. Base is designed for manipulation manipulation with machine by crane.
Indication of blade tightening and opening of the cover.
Controlling 24 V.
Maschine is equipped with hydraulic system which controles all functions of that maschine. It pushes the arm to cut, pulls up the arm and opens and closes vices.

Basic equipment of machine:
Chip extractor
Lighting of workink space.
Band saw blade.
Set of spanners for common service.
Manual instructions in eletronic form (CD).

Operating cycle:
After starting the machine, vices are clamped automatically, cut is made by selected cutting speed, in the end position microswitch is on, arm goes to selected upper position and vices open automatically. The operator only handles material.

CodeDescriptionType
SIEMENS
SIEMENS

Controling system SIEMENS.

ST
PCP

One year subscription for external machine programming (for Siemens control system) using www server.

OP
BLUEBOX

Router for remote saw service.

OP
LED

Lighting of workink space.

ST
NPH

Hydraulic tension of band.

ST
ECK

Cleaning brush of blade driven actively by motor.

ST
PEGAS-ARP+ASR+RZP

System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
ASR= Automatic adjustment of shift to cut, pursuant set parameters. Regulated shift on begining and end of cut. It is suitable for using of carbide blades. Handling using servo-engine.

ST
1200-VTH

Chain chip extractor, includedd 1 pcs of BOX-TRI.

ST
HPV

Solution of moving guides of band together with jaws of the vice.

ST
MINI LUBE 80

Wasteless lubricating system – 2 pumps, for blade 80 mm. Instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air  6 Atm.

OP
LASER LINE

Laser indicator of cut position.

OP
1200-SRZ

Vice behind the cut. Hydraulic clamping of the material behind the cut.

OP
1200-HP

Hydraulical upper vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder.

OP
1200-HP-Z

Hydraulical upper vice mounted on the vice behind the cut. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder connected with the cylinder of the vice.

OP
1200-KKR

Check of cut perpendicularity.

OP
BOX-TRI-BIG

Box for the chips 200 l with emulsion draining to the waterproof tank.

O
1200-LSG

Laser safety wall.

OP
1200-TDT 2000/1400

Input or output  extra robust roller table, width 1000 mm, length 2000 mm, 8 rollers.  Bearing capacity 7000 kg/m.  One vertical roller RBR is a piece of equipment of the roller conveyor.

O
1200-TDM 2000/1400

Input or output extra robust roller table with the drive. Driving by electrical engine, vorm gearbox and inverter. With 1000 mm, length 2000 mm, 8 rollers. Bearing capacity 7000 kg/m. One vertical roller RBR is a piece of equipment of the roller conveyor.

O
1200-TDM-L 2000/1400

Extra robust  lengthening 2 m segment with driven rollers, assembled to TDM  or directly to the drived rollers in machine, (they use the power of  hydroengines), 8 rollers. Bearing capacity 7000 kg/m. One vertical roller RBR is a piece of equipment of the roller conveyor.

O
1200-RBR

Side support fixed cylinder, height 750 mm, diameter 170 mm with its own frame, mounted to roller tables. Attention: only 1 psc for 1 roller table!

O
1200-RBRS

Side adjustable roller,  with its own steel frame, and with the movable leading 1400 mm, fixed by 2 pcs of T-nuts. Height 750 mm, diameter 170 mm. Attention: only 1 psc for 1 roller table!

O
1200-OZP

Mechanical fixed stop with ruler and scale line.  Works only with OZP-L. Impossible use for CNC !!! 

O
1200-OZP-D

Mechanical fixed stop with digital display  of setting length. Impossible use for CNC !!!  Works only with OZD-L.

O
1200-OZS

Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops.  Works only with OZS-L.

O
1200-OZS-D

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Works only with OZSD-L.

O
1200-OZP-L 2000

Measuring system for OZP mounted on 2 m roller table.

O
1200-OZD-L 2000

Measuring system for OZD mounted on 2 m roller table.

O
1200-OZS-L 2000

Measuring system for OZS mounted on 2 m roller table.

O
1200-OZSD-L 2000

Measuring system for OZS-D mounted on LAST 2 m roller table in the setup.

O
1200-SET M42

Set of 10 blades in M42 quality – with customer’s choice of teeth.  11650x80x1,6

O
1200-SET M51/10

Set of 10 blades in M51 quality – with customer’s choice of teeth.  11650x80x1,6

O
1200-NAV

Manual instruction – printed version.

O

Tech. data NO181-3 are valid on 1.1.2019. Producer has the right to make changes of technical data.
Values contained on this page are only for information purposes. This information is not an offer and is not a public promise. This indicative offer does not give right to close a contract. The only guiding document for the contract is a valid price list.