BAND SAW MACHINES

We are here to solve your cutting...

600x1100 HORIZONTAL X
Previous 600x1100 HORIZONTAL X / Horizontal Next It's no longer on sale
mm 45° 60° -45° -60° Bundle Bundle
Tube 620 620 500 650 490 x x
Rod 550* 400* 300* 400* 300* x x
Profile horizontal 1100x600 700x550 480x500 700x550 480x500 1100x400 700x400
*Recommended values for maximum performance of the blade.
Total power Engine power Blade speed Blade lenght Weight
3x400V 5,5 20-100 9000x54x1,6 5200
Lmin Lmax Bmin Bmax Hmin Hmax V
4350 4350 2060 2060 2650 2650 800

600x1100 HORIZONTALX is a highly efficient semiautomatic double-column band saw machine.
The band saw machine is designed for cutting in semiautomatic cycle perpendicularly as well as angularly. It enables angle cuts to the left (60 grades) and to the right (60 grades).
Band saw machine is designed for profile structural steel cutting. Able to cut hard-working alloyed steels due to its robust design. 

Control systém:

  • Machine is equiped with programmable PLC SIEMENS SIMATIC S7-1200. Drive of band blade and movement of arm are completely controlled and drive by SIEMENS technology.
  • The coloured touch screen HMI SIEMENS TP 700 COMFORT enables easy communication with an operator. It shows working conditions (blade speed, moving to the cut, cutting parameters etc.)
  • SEMIAUTOMATIC CYCLE: The machine cuts the material immediatelly in a semiautomatic mode. The operator uses the feeder of the machine for the manipulation with the material and for the exact feed of the material into the cutting zone. The movement of the feeder is realized by manual buttons or by GTO function. After starting GTO function the operator sets the position of the feeder, presses START GTO button and feeder goes to the set position.
  • Regulation of cutting feed is realized by controlled system by the servo-motor and throttle valve of hydraulic. Then is reached very precise cutting feed. Operator will input into program requiered cutting feed (mm/min) and bandsaw this cutting feed precisely set.
  • Two basic regimes of automatic system regulation (ASR): ARP a RZP.
    • RZP = Zone regulation. System enable to cut material in 5 zones, because of setting optional cutting feed and blade speed according on blade position. Operator can choose from 2 strategy settings: DEFENSIVE setting is approppriate for cutting very hard materials with use of carbide band blade. Cutting feed is in beginning and in the end reduced. OFENSIVE settings supports executive cutting logs. Cutting feed and band speed are in the beginning and in the end of cut increased. It´s about similar principle as ARP mode. Advantage is regulation of blade speed.
    • ARP = System of the automatic regulation of the cutting feed rate depending on the cutting resistance of the material or blunting the blade. Systém offers two basic modes of ARP: BIMETAL and CARBIDE.
      • BIMETAL mode is suitable for optimalization of the cutting feed when cutting profiles by bimetal blades. The cutting feed is higher if the blade cuts sides of the profile. As the blade reaches the full material, the system reduces the cutting feed automatically so that teeth gap of the blade would not be filled.
      • CARBIDE mode is suitable for cutting of full bars. If the blade is old (blunt), loaded is the cutting feed reduced Reaction time is slower than in mode BIMETAL.
  • The ergonomical control panel is mounted on the movable console and its position does not depend on the turntable position at any angle. The control of the machine is optimalized with our control panel and the field of view is better for an operator. The control panel is equiped with mechanical buttons and digital display of the machine control system. Mechanical buttons controls basic saw movements (arm, vice, feeder and turntable movements) and cutting cycle start. The safety button is present on the panel aswell. All buttons are highly resistant in anti-vandal version.
  • Safety module with autodiagnostics.

Construction:

  • The machine is constructionaly designed in that way, so that it corresponds to extreme exertions in productive conditions. A robust construction of machine includes vice allows to take advantage of bimetal blades maximally.
  • The arm of the machine is robust, heavy weldment and it is designed so that a toughtness and a precision of cut was ensured.
  • The arm moves along two columns using a four row linear leading with a high loading capacity. Arm movement using two hydraulic cylinders.
  • Drive pulley and tighten pulley are both metal castings.
  • The arm uses sensor and magnetic tape for position evaluation above material. Upper working position of the arm is possible to set in control system.
  • Down working position is set with adjustable mechanical stop and microswitch. Down working position of the arm is also possible to set in the saw control system. After reaching bottom working position the arm stops in the position set in the system.
  • Main vice with divided jaw that clamps the material in front of as well as behind the cut. The jaws allow a safe grip.The optimalization of the chip movement through the fixed jaw directly to the chip extractor.
  • Jaws of the main vice move in steel leading using hydraulic cylinder. One jaw is longstroke (the movement by longstroke hydraulic cylinder), one is fixed.
  • Fixed clamp of vice is equiped with guiding rollers on both ends.
  • Regulation valves for setting a vice pressure in hydraulic system.
  • Turntable with toothing rim is placed on very robust ball-bearing. As a part of turntable are 4 support rollers which minimizes friction of material and machine during its movement through.
  • The turntable’s turn at angle is provided by rotational hydromotor, worm gear box and cogwheel with hydraulic fixing at turn. RoTo function (rotate to position) with automatic setup of turntable into needed position.
  • The angles indicated on the digital display on the control panel SIEMENS. Reading of angle by incremental sensor and magnetic tape.

Basic equipment of machine:

  • The blade leading in guides with hardmetal plates and leading bearings and along cast iron pulleys.
  • The blade is 7 grades sloped regarding the level of the vice => higher performance when cutting, profiles, longer bladelife, higher performance when cutting full materials.
  • There is a guide situated on the firm beam on the drive side. On the tightening side there is the guide situated on the moving beam.
  • The guide beams of the blade are adjustable in the whole working range. A giude moving is connected with a vice-jaw movement so that to achieve the minimum distance of the guide and material. That is why it is not neccessary to set the position manually.
  • The guide beam of the blade is placed in linear rails (2 linear rails and 4 bearings) with high bearing capacity.
  • The saw-band is equipped with a guard, which protects the operator from millings and cutting emulsion.
  • Hydraulic tightening of band.
  • Automatic indication of blade tension.
  • A cleaning brush is driven by an electroengine and ensures perfect cleaning of a blade.
  • There is a planet gear box drive and a three-phase electroengine, a fluent regulation of a blade speed by a frequency converter for a fluent change of blade speed.
  • Wasteless lubricating system - standard equipment Cutting with emulsion system (water+oil) is offered as an option, we recommend to use it for full material perpendicular cutting
  • Massive base with a tank for chips. Base is designed for manipulation manipulation with machine by crane.
  • Indication of blade tightening and opening of the cover.
  • Controlling 24 V.
  • Hydraulic unit is based on horizontal column = beter cooling, better access. Machine is equipped with hydraulic system that manipulates all functions of that maschine. It moves the arm to cut, lift the arm, opens and closes vices, turning of the turntable for angular cutting. 

Basic equipment of machine: 

  • Lighting of workink space.
  • Band saw blade.
  • Set of spanners for common service.
  • Manual instructions in eletronic form (CD).

Operating cycle: 
After starting the machine, vices are clamped automatically, cut is made by selected cutting speed, in the end position microswitch is on, arm goes to selected upper position and vices open automatically. The operator only handles material.

CodeDescriptionType
600x1100-ECS

Version for cooling and lubrication by emulsion – emulsion pump, emulsion tank, gutter plates.

O
LASER LINE

Laser indicator of cut position.

O
600x1100-RDT 1000/1150
600x1100-RDT 1000/1150

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, it is possible to put them for RDP or RDZ. Lenght 1000 mm,  width of cylinders 1150 mm, capacity 1700 kg/m. 

O
600x1100-RDT 2000/1150

Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, it is possible to put them for RDP or RDZ. Lenght 2000 mm,  width of cylinders 1150 mm, capacity 1700 kg/m. 

O
600x1100-RDP 2000/1150

Input robust connecting conveyor, there is a special shape for angle turning of the machine (it is neccessary for cutting angle - 60°).  With a gutter which prevents leakage of emulsion on the floor. Lenght 2000 mm,  width of cylinders 1150 mm, capacity 1700 kg/m. 

O
600x1100-VZMP 2000/1150

Input roller which is driven by electroengine is able to lift the material hydraulically above the level of other rollers.  It serves as the  input connecting part for connecting of the roller conveyor and the machine. This system does not use rollers driven by the chain, there is no danger of  extension of the chain. Control of the roller is independent on the controlling of the machine, the roller has its own controlling panel.

O
600x1100 RDP-S

Additional table of input roller conveyor, pasted into gap when cutting at straight angle. It has to be removed when cutting at angle to the left. 

O
600x1100-RDZ 2000/1150

Output robust connecting conveyor, there is a special shape for angle turning of the machine. With a gutter which prevents leakage of emulsion on the floor. Lenght 2000 mm,  width of cylinders 1150 mm, capacity 1700 kg/m. 

O
600x1100-VZMZ 2000/1150

The roller which is driven by electroengine is able to lift the material hydraulically above the level of other rollers. It serves as the  output connecting part for connecting of the roller conveyor and the machine. This system does not use rollers driven by the chain, there is no danger of extension of the chain. Control of the roller is independent on the controlling of the machine, the roller has its own controlling panel.

O
600x1100-RDZ-S

Additional table of output roller table, pasted into gap when cutting at straight angle. It has to be removed when cutting at angle to the right .

O
600x1100 - RBRS

Side adjustable roller with its own  steel frame, and with the movable leading.

O
600x1100 - RBRS

Side adjustable roller with its own  steel frame, and with the movable leading.

O
600x1100-CS-H

Hydraulical clamping vices mounted on roller tables.

O
600x1100 - VO
DMV

Filling the gap between two rollers of the table RDT (1 piece).

O
600x1100-VZM

The roller table length 900 mm, width 1150 mm with 1 pc of pasive cylinder and one peace of driven cylinder. The roller which is driven by electroengine is able to lift the material hydraulically above the level of other rollers.   It serves as the connecting part of the roller conveyors or for connecting of the roller conveyor and the machine. Control of the roller is independent on the controlling of the machine, the roller has its own controlling panel.

O
1100 PD1-M4

Cross conveyor 4000 mm length, electrically driven cart with hydraulically lifting bar. It lifts up the material, without any contact moves above the roller tables and places on them. Operated manualy.

O
1100 PD1-M8

Cross conveyor 8000 mm length, electrically driven cart with hydraulically lifting bar. It lifts up the material, without any contact moves above the roller tables and places on them. Operated manualy.

O
1100 PD1-L4

Cross conveyor 4000 mm length with hydraulically lifting bar. It lifts up the material, without any contact moves above the roller tables and places on them. Driven and operated by PD1-M.

O
1100 PD1-L8

Cross conveyor 8000 mm length with hydraulically lifting bar. It lifts up the material, without any contact moves above the roller tables and places on them. Driven and operated by PD1-M.

O
OZP 2000
OZP 2000

Mechanical fixed stop with ruler and scale line 2 meters long.

O
OZP-D 2000
OZP-D 2000

Mechanical fixed stop with digital display 2 meters long.

O
OZS 2000
OZS 2000

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Digital display of setting length.

O
OZS-D 2000
OZS-D 2000

Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops.

O
OZP-L 2000
OZP-L 2000

2 meters long extension of OZP.

O
OZD-L 2000
OZD-L 2000

2 meters long extension of OZD.

O
600x1100-QPARTS

Set of easy worn away spare parts :
* 8 pcs: hard-metal plate side 765000,HF10
* 2 pcs: hard-metal plate upper LNKW 19-1198000, HF10
* 10 pcs: screw for vidia plates US14
* 12 pcs: bearing 61904 2RS
* 10 pcs: cleaning brush

O
600x1100-NAV

Manual instruction – printed version.

O

Tech. data NO181-3 are valid on 1.1.2019. Producer has the right to make changes of technical data.
Values contained on this page are only for information purposes. This information is not an offer and is not a public promise. This indicative offer does not give right to close a contract. The only guiding document for the contract is a valid price list.