Highly productive semi-automatic, hydraulically manipulated two column band saw machine.
The machine is designed for vertical cuts.
It is suitable for serial production in industrial premises. Thanks to its robust construction enables to cut wide range of materials including stainless and tool steels, nonferrous metals both profiles and full materials.
- Machine is equiped with programmable PLC SIEMENS SIMATIC S7-1200. Drive of band blade and movement of arm are completely controlled and drive by SIEMENS technology.
- The coloured touch screen HMI SIEMENS TP 700 COMFORT enables easy communication with an operator. It shows working conditions (blade speed, moving to the cut, cutting parameters etc.)
- SEMIAUTOMATIC CYCLE: The machine cuts the material immediatelly in a semiautomatic mode. The operator uses the feeder of the machine for the manipulation with the material and for the exact feed of the material into the cutting zone. The movement of the feeder is realized by manual buttons or by GTO function. After starting GTO function the operator sets the position of the feeder, presses START GTO button and feeder goes to the set position.
- Regulation of cutting feed is realized by controlled system by the servo-motor and throttle valve of hydraulic. Then is reached very precise cutting feed. Operator will input into program requiered cutting feed (mm/min) and bandsaw this cutting feed precisely set.
- Two basic regimes of automatic system regulation (ASR): ARP a RZP.
- RZP = Zone regulation. System enable to cut material in 5 zones, because of setting optional cutting feed and blade speed according on blade position. Operator can choose from 2 strategy settings: DEFENSIVE setting is approppriate for cutting very hard materials with use of carbide band blade. Cutting feed is in beginning and in the end reduced. OFENSIVE settings supports executive cutting logs. Cutting feed and band speed are in the beginning and in the end of cut increased. It´s about similar principle as ARP mode. Advantage is regulation of blade speed.
- ARP = System of the automatic regulation of the cutting feed rate depending on the cutting resistance of the material or blunting the blade. Systém offers two basic modes of ARP: BIMETAL and CARBIDE.
- BIMETAL mode is suitable for optimalization of the cutting feed when cutting profiles by bimetal blades. The cutting feed is higher if the blade cuts sides of the profile. As the blade reaches the full material, the system reduces the cutting feed automatically so that teeth gap of the blade would not be filled.
- CARBIDE mode is suitable for cutting of full bars. If the blade is old (blunt), loaded is the cutting feed reduced Reaction time is slower than in mode BIMETAL.
- The control panel is placed in the tightening pulley cover. The control panel is equiped with mechanical buttons and digital display of the machine control system. Mechanical buttons controls basic saw movements (arm, vice) and cutting cycle start. The safety button is present on the panel aswell. All buttons are highly resistant in anti-vandal version.
- Safety module with autodiagnostics.
- The machine is constructionaly designed in that way, so that it corresponds to extreme exertions in productive conditions. Massive construction enables using of carbid blades comfortably.
- The arm of machine with columns situated as near the clamping vice as possible minimizes vibrations and enables max. cutting performance.
- The arm of the machine is robust, heavy weldment and it is designed so that a toughtness and a precision of cut was ensured.
- The arm moves along two columns using a four row linear leading with a high loading capacity. Arm movement using two hydraulic cylinders.
- The robust steel pulleys sloped of 25 degrees regarding the level of the cut. Thanks to sloped arm the twist of the blade is eliminated and these is possibility to bring the blade closer to the minimal distance from the linear leading on columns. This arrangement eliminates vibrations and enables the max. cutting performance of the machine.
- The arm uses incremental sensor for evaluation of current position above material. Upper working position of the arm is possible to set in control system.
- Down working position is set with adjustable mechanical stop and microswitch. Down working position of the arm is also possible to set in the saw control system. After reaching bottom working position the arm stops in the position set in the system.
- Vice is robust steel weldments.
- Main vice with divided jaw that clamps the material in front of as well as behind the cut. The jaws allow a safe grip.The optimalization of the chip movement through the fixed jaw directly to the chip extractor.
- Jaws of the main vice move on two rails of linear leading using hydraulic cylinder. One jaw is longstroke (the movement by longstroke hydraulic cylinder), one is fixed.
- Regulation valves for setting a vice pressure in hydraulic system.
Basic equipment of machine:
- The blade leading in guides with hardmetal plates and leading bearings and along cast iron pulleys.
- Blade leading though the guides solved by “clearanceless blade leading” – blade is push to guide by hydraulic clinder, which enables comfortable blade exchange
- There is a guide situated on the firm beam on the drive side. On the tightening side there is the guide situated on the moving beam.
- The guide beams of the blade are adjustable in the whole working range. A giude moving is connected with a vice-jaw movement so that to achieve the minimum distance of the guide and material. That is why it is not neccessary to set the position manually.
- Hydraulic tightening of band.
- Automatic indication of blade tension.
- A cleaning brush is driven by an electroengine and ensures perfect cleaning of a blade.
- There is a planet gear box drive and a three-phase electroengine, a fluent regulation of a blade speed by a frequency converter for a fluent change of blade speed.
- The cooling system for emulsion, leaded to the guides of the blade and by LocLine system directly to the cut groove.
- Massive base with a tank for chips and with chip extractors. Base is designed for manipulation manipulation with machine by crane.
- Indication of blade tightening and opening of the cover.
- Controlling 24 V.
- Maschine is equipped with hydraulic system which controles all functions of that maschine. It pushes the arm to cut, pulls up the arm and opens and closes vices.
Basic equipment of machine:
- Chip extractor
- Lighting of workink space.
- Band saw blade.
- Set of spanners for common service.
- Manual instructions in eletronic form (CD).
After starting the machine, vices are clamped automatically, cut is made by selected cutting speed, in the end position microswitch is on, arm goes to selected upper position and vices open automatically. The operator only handles material.
|SIEMENS HMI 7"|
Controling system SIEMENS with display 7".
One year subscription for external machine programming (for Siemens control system) using www server.
Router for remote saw service.
Automatical setting of cutting parameters. Operator set only information about
Lighting of workink space.
Hydraulic tension of band.
Solution of moving guides of band together with jaws of the vice.
System of the automatic regulation of the cut depending on the cutting resistance of the material or blunting the blade.
Regulation press of vice.
Cleaning brush of blade driven actively by motor.
Chain chip extractor, includedd 1 pcs of BOX-TRI.
Hydraulic clamping of the blade in the budie. Blade leading though the guides solved by “clearanceless blade leading” – blade is push to guide by hydraulic clinder, which enables comfortable blade exchange
Box for the chips 200 l with emulsion draining to the waterproof tank.
Hydraulic upper clamping. Jaw clamps material in vertical direction using hydraulic cylinder and two axis of linear leading.
|MINI LUBE 67|
Wasteless lubricating system – 2 pumps, for blade 67 mm. Instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, necessary supply of pressed air 6 Atm.
Laser indicator of cut position.
Automatic, contactless setting of working position.
Check of cut perpendicularity.
Laser safety wall.
|700 - QPARTS|
Set of easy worn away spare parts :
Set of 10 blades in M42 quality – with customer’s choice of teeth. 7680x67x1,6
Set of 10 blades in M51 quality – with customer’s choice of teeth. 7680x67x1,6
Manual instruction – printed version.
Input or output robustroller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 800 mm, length 1000 mm, capacity 2000kg/m.
Input or output robust roller conveyor with a gutter which prevents leakage of emulsion on the floor, width of cylinders 800 mm, length 2000 mm, capacity 2000kg/m.
Input or output robustroller conveyor with driven rollers . Driving by electrical engine, vorm gearbox and inverter. By chain are driving cylinders. Width of cylinders 800 mm, length 2000 mm, capacity 2000 kg/m. Impossibile use for automatical saws CNC !!!
Input or output robust roller conveyor with driven rollers. Driving from RDM throught chain. Width of cylinders 800 mm, length 2000 mm, capacity 1700 kg/m. Impossibile use for automatical saws CNC !!!
Side support fixed cylinder, height 530 mm, diameter 130 mm comes with its own frame, mounted to roller tables. It is possible to install only one RBR per roller conveyor.
Side support fixed cylinder, height 400 mm, diameter 130 mm comes with its own frame, mounted to roller tables. It is possible to install only one RBR per roller conveyor.
Side adjustable roller with its own steel frame, and with the movable leading, fixed by 2 pcs of T-nuts. height 650 mm.
Hydraulical shift for the RBRS roller including assambly of electrical and hydraulical instalation. Possibile only with RBRS
Roller of roller table RDT put into gap.
Cylinder - full material. Price for one piece.
|700 DMV 1000|
Cover of roller table, length 1000 mm.
|700 DMV 2000|
Cover of roller table, length 2000 mm.
Input or output extra robust roller table. Width 800 mm, length 2000 mm, 8 rollers. Bearing capacity 7000 kg/m. One vertical roller RBR is a piece of equipment of the roller conveyor. Cylinders with surfacing – hardness 55 HRc.
Input or output extra robust roller table with the drive. Driving by electrical engine, vorm gearbox and inverter. With 800 mm, length 2000 mm, 8 rollers. Bearing capacity 7000 kg/m. One vertical roller RBR is a piece of equipment of the roller conveyor. Cylinders with surfacing – hardness 55 HRc.
Extra robust lengthening 2 m segment with driven rollers, assembled to TDM .With 800 mm, length 2000 mm, 8 rollers, capacity 7000kg/1m. One vertical roller RBR is a piece of equipment of the roller conveyor. Cylinders with surfacing – hardness 55 HRc
Mechanical fixed stop with ruler and scale line. Works only with OZP-L. Impossible use for CNC !!!
Mechanical fixed stop with digital display of setting length. Impossible use for CNC !!! Works only with OZD-L.
Electromechanical stop working with RDM roller table. It has two contacts. When material switches the first contact, RDM slows down, after switching the second contact, RDM stops. Works only with OZS-L.
Electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops. Works only with OZSD-L.
Measuring system for OZP mounted on 1 m roller table.
Measuring system for OZP mounted on 2 m roller table.
Measuring system for OZP mounted on LAST 1 m roller table in the setup.
Measuring system for OZP mounted on LAST 2m roller table in the setup.
Measuring system for OZD mounted on 1 m roller table.
Measuring system for OZD mounted on 2 m roller table.
Measuring system for OZD mounted on LAST 1 m roller table in the setup.
Measuring system for OZD mounted on LAST 2 m roller table in the setup.
Measuring system for OZS mounted on 1 m roller table.
Measuring system for OZS mounted on 2 m roller table.
Measuring system for OZS mounted on LAST 1 m roller table in the setup.
Measuring system for OZS mounted on LAST 2 m roller table in the setup.
Measuring system for OZS-D mounted on 1 m roller table.
Measuring system for OZS-D mounted on 2 m roller table.
Measuring system for OZS-D mounted on LAST 1 m roller table in the setup.
Measuring system for OZS-D mounted on LAST 2 m roller table in the setup
Tech. data NO211 are valid on 1.1.2021. Producer has the right to make changes of technical data.
Values contained on this page are only for information purposes. This information is not an offer and is not a public promise. This indicative offer does not give right to close a contract. The only guiding document for the contract is a valid price list.
or send inquiry!